PartsTable
Technical Data Sheet
PartsTable / MRO / 3130-05
3130-05 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include color: GRAY/GREY, material: PLASTIC, inscription: PERCENT SYMBOL AND 5, overall_height: 0.500 INCHES NOMINAL IN, overall_length: 0.750 INCHES NOMINAL IN, overall_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-145-6258, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3130-05
NSN: 4720-00-145-6258
FSC: 4720
CAGE: 85757 — EATON CORP (USA)
SPECIFICATIONS
colorGRAY/GREY
materialPLASTIC
inscriptionPERCENT SYMBOL AND 5
overall_height0.500 INCHES NOMINAL IN
overall_length0.750 INCHES NOMINAL IN
overall_diameter0.500 INCHES NOMINAL IN
NSN4720-00-145-6258
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 3130-05 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM INSIDE BENDING RADIUS: 1.750 INCHES IN
•
OUTSIDE DIAMETER: 0.555 INCHES MAXIMUM IN
•
BURST TEST PRESSURE: 10000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED FIBER AND OUTER LAYER MOLDED POLYURETHANE
•
OPERATING PRESSURE: 2500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
HYDROSTATIC TEST PRESSURE: 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MEASURING METHOD AND LENGTH: 120.000 INCHES MINIMUM OVERALL AND 144.000 INCHES MAXIMUM OVERALL IN
•
INSIDE SURFACE CONDITION: SMOOTH
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM INSIDE BENDING RADIUS1.750 INCHES IN
OUTSIDE DIAMETER0.555 INCHES MAXIMUM IN
BURST TEST PRESSURE10000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED FIBER AND OUTER LAYER MOLDED POLYURETHANE
OPERATING PRESSURE2500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
HYDROSTATIC TEST PRESSURE5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MEASURING METHOD AND LENGTH120.000 INCHES MINIMUM OVERALL AND 144.000 INCHES MAXIMUM OVERALL IN
INSIDE SURFACE CONDITIONSMOOTH
MATERIALPLASTIC POLYAMIDE NYLON TUBE
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND CHEMICAL RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
313005Interchangeable
interchangeable cross-reference
interchangeable
512050Interchangeable
interchangeable cross-reference
interchangeable
21001-0028Interchangeable
interchangeable cross-reference
interchangeable
228-19-000Interchangeable
interchangeable cross-reference
interchangeable
7186732-05Interchangeable
interchangeable cross-reference
interchangeable
129920Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3130-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3130-05?
3130-05 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3130-05?
There are 13 known substitutes for 3130-05: 313005, 512050, 21001-0028 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3130-05?
3130-05 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-145-6258. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3130-05

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026