The Bearing Unit,roller, cataloged under National Stock Number 3130-01-350-7104, is classified within Federal Supply Class 3130 (Bearings, Mounted) of the Bearings group. The manufacturer of record is Altra Industrial Motion Corp.. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3130-01-350-7104 |
| Primary Part Number | 64624 |
| Item Name | Bearing Unit,roller |
| FSC / FSG | 3130 / 31 — Bearings, Mounted |
| Manufacturer | Altra Industrial Motion Corp. |
| Status | ACTIVE |
| Seal Type | LABYRINTH |
| Lubrication Material | GREASE |
| Lubrication Fitting Type | HYDRAULIC |
| Housing Height | 3.750 INCHES NOMINAL IN |
| Mounting Slot Length | 1.188 INCHES NOMINAL IN |
| Internal Fit-Up Designation | STANDARD |
| Mounting Hole Type | SLOTTED |
| Rotating Element Locking Method | SETSCREW LOCKING COLLAR |
| Seal Location | BOTH ENDS |
| Block Type | FIXED |
| Style Designator | PILLOW BLOCK, SOLID |
| Collar Location | BOTH ENDS |
| Center to Center Distance Between Mounting Holes Along Width | 4.688 INCHES MINIMUM AND 5.938 INCHES MAXIMUM IN |
| Housing Width | 7.375 INCHES NOMINAL IN |
| Base Length | 1.969 INCHES NOMINAL IN |
| Alignment Type | RIGID |
| Rolling Element Groove Quantity | 2 |
| Shaft End Type | OPEN |
| Base Thickness | 1.125 INCHES NOMINAL IN |
| Bore Diameter | 1.4375 INCHES MINIMUM AND 1.4385 INCHES MAXIMUM IN |
| Material | IRON CAST HOUSING |
| Material | STEEL BEARING |
| Housing Length | 3.000 INCHES NOMINAL IN |
| Height From Bottom of Base to Bore Centerline | 1.875 INCHES NOMINAL IN |
| Lubrication Fitting Angle From Horizontal Centerline | 45.0 DEGREES NOMINAL |
| Load Capability Type | RADIAL AND THRUST |
| Mounting Slot Width | 0.562 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 64624 PRIMARY | Altra Industrial Motion Corp. (USA) |
| Reference | Meaning |
|---|---|
| 64624-MR | C/1 Advisory reference — outside the item-of-supply concept Altra Industrial Motion Corp. |
| MR-1-7/16 | 5/9 Secondary reference Altra Industrial Motion Corp. |
NSN 3130-01-350-7104 is a Bearing Unit,roller, manufactured by Altra Industrial Motion Corp., classified under FSC 3130, Bearings, Mounted. Status: active.
NSN 3130-01-350-7104 has 1 manufacturer part number on file: 64624 (Altra Industrial Motion Corp.).
1 possible match (shared part number, not a government interchangeability claim): 6110-01-650-3225. Verify interchangeability with system specifications before substitution.
Key specifications for 64624: Seal Type: LABYRINTH; Lubrication Material: GREASE; Lubrication Fitting Type: HYDRAULIC; Housing Height: 3.750 INCHES NOMINAL IN. 27 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.