The Bearing Unit,ball, cataloged under National Stock Number 3130-01-234-0430, is classified within Federal Supply Class 3130 (Bearings, Mounted) of the Bearings group. The manufacturer of record is Skf Usa Inc.. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3130-01-234-0430 |
| Primary Part Number | 52 R-3/4 |
| Item Name | Bearing Unit,ball |
| FSC / FSG | 3130 / 31 — Bearings, Mounted |
| Manufacturer | Skf Usa Inc. |
| Status | ACTIVE |
| Seal Type | LABYRINTH |
| Lubrication Material | GREASE |
| Lubrication Fitting Type | SELF LUBRICATED |
| Assembly Overall Length | 1.156 INCHES NOMINAL IN |
| Housing Height | 2.219 INCHES NOMINAL IN |
| Mounting Slot Length | 0.438 INCHES NOMINAL0.438 INCHES NOMINAL IN |
| Internal Fit-Up Designation | STANDARD |
| Mounting Hole Type | SLOTTED |
| Rotating Element Locking Method | DIRECT |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| Seal Location | BOTH ENDS |
| Block Type | FIXED |
| Style Designator | PILLOW BLOCK, SEPARABLE WITH INNERLINER |
| Collar Location | ONE END |
| Features Provided | GROUND ROLLING ELEMENT GROOVEGROUND ROLLING ELEMENT GROOVE |
| Center to Center Distance Between Mounting Holes Along Width | 3.375 INCHES NOMINAL IN |
| Departure From Cited Document | AS MODIFIED BY MATERIAL |
| Housing Width | 4.250 INCHES NOMINAL4.250 INCHES NOMINAL IN |
| Base Length | 1.250 INCHES NOMINAL IN |
| Alignment Type | RIGID |
| Rolling Element Groove Quantity | 2 |
| Shaft End Type | CLOSED |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Base Thickness | 0.125 INCHES NOMINAL IN |
| Bore Diameter | 0.7500 INCHES NOMINAL0.7500 INCHES NOMINAL IN |
| Material | RUBBER SYNTHETIC SEAL |
| Material | STEEL HOUSING |
| Material | STEEL BEARING |
| Material | RUBBER SYNTHETIC INNER LINER |
| Housing Length | 0.844 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | S |
| Part Number | Manufacturer |
|---|---|
| ASRPP204-12 | Ntn Bearing Corporation of America (USA) |
| 52 R-3/4 PRIMARY | Skf Usa Inc. (USA) |
| Reference | Meaning |
|---|---|
| LRP-12 | 5/9 Secondary reference Emerson Power Transmission Corporation Div Ept |
NSN 3130-01-234-0430 is a Bearing Unit,ball, manufactured by Skf Usa Inc., classified under FSC 3130, Bearings, Mounted. Status: active.
NSN 3130-01-234-0430 has 2 manufacturer part numbers on file: ASRPP204-12 (Ntn Bearing Corporation of America), 52 R-3/4 (Skf Usa Inc.).
1 possible match (shared part number, not a government interchangeability claim): 2930-01-273-0425. Verify interchangeability with system specifications before substitution.
Key specifications for 52 R-3/4: Seal Type: LABYRINTH; Lubrication Material: GREASE; Lubrication Fitting Type: SELF LUBRICATED; Assembly Overall Length: 1.156 INCHES NOMINAL IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.