The Bearing Unit,ball, cataloged under National Stock Number 3130-01-222-0928, is classified within Federal Supply Class 3130 (Bearings, Mounted) of the Bearings group. The manufacturer of record is Timken Co Div the Timken Company. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3130-01-222-0928 |
| Primary Part Number | RASC1 15/16 |
| Item Name | Bearing Unit,ball |
| FSC / FSG | 3130 / 31 — Bearings, Mounted |
| Manufacturer | Timken Co Div the Timken Company |
| Status | ACTIVE |
| Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Lubrication Fitting Type | HYDRAULIC |
| Assembly Overall Length | 2.281 INCHES NOMINAL IN |
| Housing Height | 4.500 INCHES NOMINAL IN |
| Mounting Slot Length | 0.938 INCHES NOMINAL IN |
| Internal Fit-Up Designation | STANDARD |
| Mounting Hole Type | SLOTTED |
| Rotating Element Locking Method | SETSCREW LOCKING COLLAR |
| Seal Location | BOTH ENDS |
| Block Type | FIXED |
| Style Designator | PILLOW BLOCK, SOLID |
| Collar Location | ONE END |
| Features Provided | GROUND ROLLING ELEMENT GROOVE |
| Center to Center Distance Between Mounting Holes Along Width | 6.188 INCHES NOMINAL IN |
| Housing Width | 8.000 INCHES NOMINAL IN |
| Base Length | 2.188 INCHES NOMINAL IN |
| Alignment Type | SELF-ALIGNING |
| Rolling Element Groove Quantity | 2 |
| Shaft End Type | OPEN |
| Base Thickness | 0.750 INCHES NOMINAL IN |
| Bore Diameter | 1.9375 INCHES NOMINAL IN |
| Material | RUBBER SYNTHETIC AND STEEL SEAL |
| Material | IRON CAST HOUSING |
| Material | STEEL BEARING |
| Material | STEEL COLLAR |
| Height From Bottom of Base to Bore Centerline | 2.250 INCHES NOMINAL IN |
| Lubrication Fitting Angle From Horizontal Centerline | 45.0 DEGREES NOMINAL |
| Load Capability Type | RADIAL |
| Mounting Slot Width | 0.688 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| RASC1 15/16 PRIMARY | Timken Co Div the Timken Company (USA) |
NSN 3130-01-222-0928 is a Bearing Unit,ball, manufactured by Timken Co Div the Timken Company, classified under FSC 3130, Bearings, Mounted. Status: active.
NSN 3130-01-222-0928 has 1 manufacturer part number on file: RASC1 15/16 (Timken Co Div the Timken Company).
Key specifications for RASC1 15/16: Seal Type: CONTACT; Lubrication Material: GREASE; Lubrication Fitting Type: HYDRAULIC; Assembly Overall Length: 2.281 INCHES NOMINAL IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.