The Bearing Unit,ball, cataloged under National Stock Number 3130-00-967-2846, is classified within Federal Supply Class 3130 (No Item Name Available) of the Bearings group. The primary manufacturer of record is Timken Co Div the Timken Company. Government technical data includes 27 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 3130-00-967-2846 |
| Primary Part Number | RAK1 |
| Item Name | Bearing Unit,ball |
| FSC / FSG | 3130 / 31 — No Item Name Available |
| Manufacturer | Timken Co Div the Timken Company |
| Status | CANCELLED |
| Material | STEEL AND WOOL SEAL |
| Material | IRON CAST HOUSING |
| Rotating Element Locking Method | SETSCREW LOCKING COLLAR |
| Height From Bottom of Base to Bore Centerline | 1.3125 INCHES NOMINAL IN |
| Load Capability Type | RADIAL |
| Style Designator | PILLOW BLOCK, SOLID |
| Rolling Element Groove Quantity | 1 |
| Housing Width | 5.5000 INCHES NOMINAL IN |
| Seal Location | BOTH ENDS |
| Seal Type | CONTACT |
| Center to Center Distance Between Mounting Holes Along Width | 4.1250 INCHES NOMINAL IN |
| Alignment Type | SELF-ALIGNING |
| Lubrication Fitting Type | SELF LUBRICATED |
| Internal Fit-Up Designation | STANDARD |
| Mounting Hole Type | SLOTTED |
| Bore Diameter | 1.0000 INCHES NOMINAL IN |
| Collar Location | ONE END |
| Mounting Slot Length | 0.5625 INCHES NOMINAL IN |
| Shaft End Type | OPEN |
| Mounting Slot Width | 0.4375 INCHES NOMINAL IN |
| Features Provided | GROUND ROLLING ELEMENT GROOVE |
| Assembly Overall Length | 1.7500 INCHES NOMINAL IN |
| Lubrication Fitting Angle From Horizontal Centerline | 90.0 DEGREES NOMINAL |
| Housing Height | 2.6875 INCHES NOMINAL IN |
| Base Length | 1.7500 INCHES NOMINAL IN |
| Block Type | FIXED |
| Base Thickness | 0.6250 INCHES NOMINAL IN |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 3130006997987 | E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
| 3130PL0808987 | Jednolity Indeks Materialowy - Uniform Material Index (POL) |
| RAK 1W/S1100K | Timken Co Div the Timken Company (USA) |
| RAK (SET) | Timken Co Div the Timken Company (USA) |
| RAK1 PRIMARY | Timken Co Div the Timken Company (USA) |
NSN 3130-00-967-2846 is a Bearing Unit,ball, manufactured by Timken Co Div the Timken Company, classified under FSC 3130 (No Item Name Available). Status: cancelled.
NSN 3130-00-967-2846 has 5 cross-referenced part numbers: 3130006997987 (E.c.a Etablissement Centrald'approvisionnement Des Forces Armee), 3130PL0808987 (Jednolity Indeks Materialowy - Uniform Material Index), RAK 1W/S1100K (Timken Co Div the Timken Company), RAK (SET) (Timken Co Div the Timken Company), RAK1 (Timken Co Div the Timken Company).
There is 1 known substitute for 3130-00-967-2846: 3130-00-159-1475. Verify interchangeability with system specifications before substitution.
Key specifications for RAK1: Material: STEEL AND WOOL SEAL; Material: IRON CAST HOUSING; Rotating Element Locking Method: SETSCREW LOCKING COLLAR; Height From Bottom of Base to Bore Centerline: 1.3125 INCHES NOMINAL IN. 27 total characteristics are documented in the Federal Logistics Information System.
NSN 3130-00-967-2846 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.