The Bearing Unit,ball, cataloged under National Stock Number 3130-00-860-0012, is classified within Federal Supply Class 3130 (No Item Name Available) of the Bearings group. The primary manufacturer of record is Stephens-Adamson Inc a Sub of Allis-Chalmers Corp. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 5 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3130-00-860-0012 |
| Primary Part Number | SFT16 |
| Item Name | Bearing Unit,ball |
| FSC / FSG | 3130 / 31 — No Item Name Available |
| Manufacturer | Stephens-Adamson Inc a Sub of Allis-Chalmers Corp |
| Status | ACTIVE |
| Alignment Type | SELF-ALIGNING |
| Lubrication Fitting Type | HYDRAULIC |
| Lubrication Fitting Angle From Horizontal Centerline | 45.0 DEGREES NOMINAL |
| Rotating Element Locking Method | DIRECT |
| Lubrication Material | GREASE |
| Overall Outside Diameter | 4.8750 INCHES NOMINAL IN |
| Seal Type | CONTACT |
| Seal Location | BOTH ENDS |
| Load Capability Type | RADIAL |
| Mounting Hole Diameter | 0.4531 INCHES NOMINAL IN |
| Shaft End Type | OPEN |
| Internal Fit-Up Designation | STANDARD |
| Block Type | FIXED |
| Assembly Overall Length | 1.4375 INCHES NOMINAL IN |
| Flange Thickness | 0.5313 INCHES NOMINAL IN |
| Features Provided | GROUND ROLLING ELEMENT GROOVE |
| Bolt Circle Diameter | 3.8906 INCHES NOMINAL IN |
| Bore Diameter | 1.0000 INCHES NOMINAL IN |
| Rolling Element Groove Quantity | 1 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
NSN 3130-00-860-0012 is a Bearing Unit,ball, manufactured by Stephens-Adamson Inc a Sub of Allis-Chalmers Corp, classified under FSC 3130 (No Item Name Available). Status: active.
NSN 3130-00-860-0012 has 2 cross-referenced part numbers: SFT16 (Stephens-Adamson Inc a Sub of Allis-Chalmers Corp), P524 (Stephens-Adamson Inc a Sub of Allis-Chalmers Corp).
There are 5 known substitutes for 3130-00-860-0012: 8010-00-166-3151, 3130-00-780-0736, 3120-00-899-8830 and 2 more. Verify interchangeability with system specifications before substitution.
Key specifications for SFT16: Alignment Type: SELF-ALIGNING; Lubrication Fitting Type: HYDRAULIC; Lubrication Fitting Angle From Horizontal Centerline: 45.0 DEGREES NOMINAL; Rotating Element Locking Method: DIRECT. 19 total characteristics are documented in the Federal Logistics Information System.