The Bearing Unit,roller, cataloged under National Stock Number 3130-00-438-8996, is classified within Federal Supply Class 3130 (Bearings, Mounted) of the Bearings group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3130-00-438-8996 |
| Item Name | Bearing Unit,roller |
| FSC / FSG | 3130 / 31 — Bearings, Mounted |
| Status | ACTIVE |
| Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Lubrication Fitting Type | HYDRAULIC |
| Assembly Overall Length | 4.0312 INCHES NOMINAL IN |
| Internal Fit-Up Designation | STANDARD |
| Mounting Hole Type | ROUND, UNTHREADED |
| Rotating Element Locking Method | SETSCREW LOCKING COLLAR |
| Seal Location | BOTH ENDS |
| Block Type | FIXED |
| Style Designator | FLANGE CARTRIDGE BLOCK |
| Mounting Hole Diameter | 0.6250 INCHES NOMINAL IN |
| Collar Location | ONE END |
| Features Provided | GROUND ROLLING ELEMENT GROOVE |
| Pilot Diameter | 6.3730 INCHES MINIMUM AND 6.3750 INCHES MAXIMUM IN |
| Alignment Type | SELF-ALIGNING |
| Rolling Element Groove Quantity | 2 |
| Bolt Circle Diameter | 7.5000 INCHES NOMINAL IN |
| Shaft End Type | OPEN |
| Bore Diameter | 3.0000 INCHES NOMINAL IN |
| Material | STEEL BEARING SURFACE |
| Material | RUBBER AND STEEL SEAL |
| Material | IRON CAST HOUSING |
| Housing Length | 3.1875 INCHES NOMINAL IN |
| Housing Diameter | 8.7500 INCHES NOMINAL IN |
| Lubrication Fitting Angle From Horizontal Centerline | 90.0 DEGREES NOMINAL |
| Load Capability Type | RADIAL AND THRUST |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BS214184 | 3/9 Design control — primary reference Rexnord Industries, Llc Div Link-Belt Bearing Operation |
NSN 3130-00-438-8996 is a Bearing Unit,roller, classified under FSC 3130, Bearings, Mounted. Status: active.
Key specifications for 3130-00-438-8996: Seal Type: CONTACT; Lubrication Material: GREASE; Lubrication Fitting Type: HYDRAULIC; Assembly Overall Length: 4.0312 INCHES NOMINAL IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.