The Bearing Unit,ball, cataloged under National Stock Number 3130-00-278-7019, is classified within Federal Supply Class 3130 (Bearings, Mounted) of the Bearings group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3130-00-278-7019 |
| Item Name | Bearing Unit,ball |
| FSC / FSG | 3130 / 31 — Bearings, Mounted |
| Status | ACTIVE |
| Seal Type | LABYRINTH |
| Lubrication Material | GREASE |
| Lubrication Fitting Type | HYDRAULIC |
| Assembly Overall Length | 1.7500 INCHES NOMINAL IN |
| Internal Fit-Up Designation | STANDARD |
| Flange Thickness | 0.5625 INCHES NOMINAL IN |
| Mounting Hole Type | ROUND, UNTHREADED |
| Rotating Element Locking Method | DIRECT |
| Seal Location | BOTH ENDS |
| Block Type | FIXED |
| Style Designator | FLANGE BLOCK |
| Mounting Hole Diameter | 0.5156 INCHES NOMINAL IN |
| Features Provided | GROUND ROLLING ELEMENT GROOVE |
| Housing Width | 4.6250 INCHES NOMINAL IN |
| Alignment Type | SELF-ALIGNING |
| Rolling Element Groove Quantity | 1 |
| Bolt Circle Diameter | 3.6250 INCHES NOMINAL IN |
| Shaft End Type | OPEN |
| Bore Diameter | 1.4375 INCHES NOMINAL IN |
| Material | STEEL AND WOOL SEAL |
| Material | IRON CAST HOUSING |
| Housing Length | 1.3438 INCHES NOMINAL IN |
| Lubrication Fitting Angle From Horizontal Centerline | 90.0 DEGREES NOMINAL |
| Load Capability Type | RADIAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2118-0124 | 3/9 Design control — primary reference American Laundry Machinery Inc |
NSN 3130-00-278-7019 is a Bearing Unit,ball, classified under FSC 3130, Bearings, Mounted. Status: active.
Key specifications for 3130-00-278-7019: Seal Type: LABYRINTH; Lubrication Material: GREASE; Lubrication Fitting Type: HYDRAULIC; Assembly Overall Length: 1.7500 INCHES NOMINAL IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.