PartsTable TECHNICAL DATA SHEET
NSN 3130-00-037-9706Government record, cited

Bearing Unit, Ball3130-00-037-9706

NSN 3130-00-037-9706 · NIIN 000379706 · Part number 123CM12201-501
Northrop Grumman Systems Corporation · FSC 3130 — Bearings, Mounted · FSG 31 — Bearings · CAGE 79RG9
Government record, cited
NSN 3130-00-037-9706 — this item is cataloged by the U.S. Government under National Stock Number 3130-00-037-9706. Manufacturer of record part number: 123CM12201-501.
Also searched as  3130-00-037-9706 · 3130000379706 · NIIN 000379706 · 00-037-9706 · FSC 3130 Bearings, Mounted · CAGE 79RG9 · 123CM12201-501
Nearby stock numbers  ·
Features
  • Bearing Unit,ball — FSC 3130
  • Seal Type: SELF-ALIGNING
  • Lubrication Material: GREASE
  • Internal Fit-Up Designation: TIGHT
  • Mounting Hole Type: ROUND, UNTHREADED
  • Rotating Element Locking Method: STRAIGHT SLEEVE
  • Seal Location: BOTH ENDS
  • Mounting Hole Diameter: 0.8738 INCHES MINIMUM AND 0.8743 INCHES MAXIMUM IN
Identification
  • NSN: 3130-00-037-9706
  • NIIN: 000379706
  • FSC: 3130 — Bearings, Mounted
  • FSG: 31 — Bearings
  • Primary part number: 123CM12201-501
  • Manufacturer: Northrop Grumman Systems Corporation
General Description

The Bearing Unit,ball, cataloged under National Stock Number 3130-00-037-9706, is classified within Federal Supply Class 3130 (Bearings, Mounted) of the Bearings group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3130-00-037-9706
Primary Part Number123CM12201-501
Item NameBearing Unit,ball
FSC / FSG3130 / 31 — Bearings, Mounted
ManufacturerNorthrop Grumman Systems Corporation
StatusACTIVE
Seal TypeSELF-ALIGNING
Lubrication MaterialGREASE
Internal Fit-Up DesignationTIGHT
Mounting Hole TypeROUND, UNTHREADED
Rotating Element Locking MethodSTRAIGHT SLEEVE
Seal LocationBOTH ENDS
Mounting Hole Diameter0.8738 INCHES MINIMUM AND 0.8743 INCHES MAXIMUM IN
Features ProvidedGROUND ROLLING ELEMENT GROOVE
Alignment TypeSELF-ALIGNING
Rolling Element Groove Quantity1
Test Data Document81349-MIL-I-686 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Bore Diameter0.3750 INCHES NOMINAL IN
Load Capability TypeRADIAL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
123CM12201-501 PRIMARY Northrop Grumman Systems Corporation (USA)
Reference documents
ReferenceMeaning
123CM12201-501 5/9 Secondary reference
Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems
123CM12201-501 5/9 Secondary reference
Northrop Grumman Systems Corporation
No interchangeability data on file.
Other items in FSC 3130 — Bearings, Mounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3130-00-001-5118
3130-00-001-5118 · Item name not on file
3130-00-001-5137
BEARING UNIT,BALL
3130-00-001-6585
3130-00-001-6585 · Item name not on file
3130-00-003-0422
3130-00-003-0422 · Item name not on file
3130-00-003-0455
3130-00-003-0455 · Item name not on file
3130-00-003-0794
BEARING UNIT,BALL
3130-00-003-2802
BEARING UNIT,BALL
3130-00-003-9535
3130-00-003-9535 · Item name not on file

Frequently Asked Questions

What is NSN 3130-00-037-9706?

NSN 3130-00-037-9706 is a Bearing Unit,ball, manufactured by Northrop Grumman Systems Corporation, classified under FSC 3130, Bearings, Mounted. Status: active.

What part numbers are listed for NSN 3130-00-037-9706?

NSN 3130-00-037-9706 has 1 manufacturer part number on file: 123CM12201-501 (Northrop Grumman Systems Corporation).

What are the specifications of 123CM12201-501?

Key specifications for 123CM12201-501: Seal Type: SELF-ALIGNING; Lubrication Material: GREASE; Internal Fit-Up Designation: TIGHT; Mounting Hole Type: ROUND, UNTHREADED. 13 specifications are documented in the U.S. Government catalog.

Is NSN 3130-00-037-9706 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com