PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 312S-T14
312S-T14 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.302 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN, center_hole_diameter: 1.106 INCHES MINIMUM AND 1.118 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-192-3388, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
312S-T14
NSN: 3110-01-192-3388
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter1.302 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN
center_hole_diameter1.106 INCHES MINIMUM AND 1.118 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN3110-01-192-3388
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 312S-T14 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
N15133Interchangeable
interchangeable cross-reference
interchangeable
D2000-M3CH714A25B34E016E036Interchangeable
interchangeable cross-reference
interchangeable
2-122 N219-70Interchangeable
interchangeable cross-reference
interchangeable
239743Interchangeable
Same NIIN cross-reference
interchangeable
6312C4HInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 312S-T14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 312S-T14?
312S-T14 is a BEARING,BALL,ANNULAR.
What parts can replace 312S-T14?
There are 5 known substitutes for 312S-T14: N15133, D2000-M3CH714A25B34E016E036, 2-122 N219-70 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 312S-T14?
312S-T14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-192-3388. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 312S-T14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026