The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018, first_leg_angle: 0.080 RADIANS NOMINAL, first_leg_style: CHAMFERED ENDS, first_leg_length: 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN, style_designator: ANGLE, second_leg_length: 0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-493-7869, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
312305-1
NSN:5340-01-493-7869 FSC:5340 — Hardware, Commercial CAGE:15280 — NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION (USA)
SPECIFICATIONS
material
STEEL COMP 1018
first_leg_angle
0.080 RADIANS NOMINAL
first_leg_style
CHAMFERED ENDS
first_leg_length
0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
style_designator
ANGLE
second_leg_length
0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
surface_treatment
CADMIUM AND PRIMER AND PRIMER EPOXY
mounting_hole_type
PLAIN
first_leg_thickness
0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
second_leg_thickness
0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
second_leg_chamfer_angle
45.0 DEGREES NOMINAL
second_leg_hole_diameter
0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
NSN
5340-01-493-7869
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.470 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 0.080 RADIANS NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-22750 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 3RD TREATMENT RESPONSE
•
SECOND LEG LENGTH: 0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.370 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
•
SECOND LEG CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: ANGLE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.470 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
FIRST LEG ANGLE
0.080 RADIANS NOMINAL
SECOND LEG HOLE DIAMETER
0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-22750 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 3RD TREATMENT RESPONSE
SECOND LEG LENGTH
0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
0.370 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
SECOND LEG CHAMFER ANGLE
45.0 DEGREES NOMINAL
STYLE DESIGNATOR
ANGLE
FIRST LEG STYLE
CHAMFERED ENDS
MATERIAL DOCUMENT AND CLASSIFICATION
AST-108-69 ASSN STD ALL MATERIAL RESPONSES
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 312305-1?
312305-1 is a BRACKET,ANGLE.
What parts can replace 312305-1?
There is 1 known substitute for 312305-1: 33-052808-01. Substitute compatibility should be verified for your specific system.
What is the NSN for 312305-1?
312305-1 is cataloged in the U.S. Government catalog under NSN 5340-01-493-7869. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.