PartsTable
Technical Data Sheet
Download PDF

31216-1245 — GRILLE,METAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

31216-1245: GRILLE,METAL.

The GRILLE,METAL is a the manufacturer industrial component. Key specifications include shape: ROUND, material: ALUMINUM ALLOY OVERALL, core_type: PERFORATED METAL, frame_type: ANGLE, metal_thickness: 0.05 INCHES NOMINAL IN, frame_overall_width: 0.880 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-058-1457, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
31216-1245
NSN: 5340-01-058-1457
FSC: 5340 — Hardware, Commercial
CAGE: 3CPE0 — SAFRAN POWER USA LLC (USA)
SPECIFICATIONS
shapeROUND
materialALUMINUM ALLOY OVERALL
core_typePERFORATED METAL
frame_typeANGLE
metal_thickness0.05 INCHES NOMINAL IN
frame_overall_width0.880 INCHES NOMINAL IN
frame_opening_diameter5.225 INCHES NOMINAL IN
frame_overall_diameter6.000 INCHES NOMINAL IN
mounting_hole_diameter0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
mounting_hole_quantity5
NSN5340-01-058-1457
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 31216-1245 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 5
•
FRAME OPENING DIAMETER: 5.225 INCHES NOMINAL IN
•
METAL THICKNESS: 0.05 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
•
SHAPE: ROUND
•
FRAME OVERALL WIDTH: 0.880 INCHES NOMINAL IN
•
FRAME TYPE: ANGLE
•
FRAME OVERALL DIAMETER: 6.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY5
FRAME OPENING DIAMETER5.225 INCHES NOMINAL IN
METAL THICKNESS0.05 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
SHAPEROUND
FRAME OVERALL WIDTH0.880 INCHES NOMINAL IN
FRAME TYPEANGLE
FRAME OVERALL DIAMETER6.000 INCHES NOMINAL IN
CORE TYPEPERFORATED METAL
MATERIALALUMINUM ALLOY OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
31216-1240Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 31216-1245?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 31216-1245?
31216-1245 is a GRILLE,METAL.
What parts can replace 31216-1245?
There is 1 known substitute for 31216-1245: 31216-1240. Substitute compatibility should be verified for your specific system.
What is the NSN for 31216-1245?
31216-1245 is cataloged in the U.S. Government catalog under NSN 5340-01-058-1457. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 31216-1245