PartsTable TECHNICAL DATA SHEET
NSN 3120-01-396-3038Government record, cited

Bearing, Plain, Rod End3120-01-396-3038

NSN 3120-01-396-3038 · NIIN 013963038 · Part number M81935/1-08KL
Sae International Dba Sae International · FSC 3120 — Bearings, Plain, Unmounted · FSG 31 — Bearings · CAGE 0U583
Government record, cited
NSN 3120-01-396-3038 — this item is cataloged by the U.S. Government under National Stock Number 3120-01-396-3038. Manufacturer of record part number: M81935/1-08KL.
Also searched as  3120-01-396-3038 · 3120013963038 · NIIN 013963038 · 01-396-3038 · FSC 3120 Bearings, Plain, Unmounted · CAGE 0U583 · M81935/1-08KL · MIL-B-81935/1 · AS81935
Nearby stock numbers  ·
Features
  • Bearing,plain,rod End — FSC 3120
  • Shank Thread Length: 1.4370 INCHES MINIMUM AND 1.4990 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
  • Bore Center to Shank End Distance: 2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM IN
  • Inner Member Width: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
  • Hardness Rating: 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
  • Hardness Rating: 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
  • Hardness Rating: 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
Identification
  • NSN: 3120-01-396-3038
  • NIIN: 013963038
  • FSC: 3120 — Bearings, Plain, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: M81935/1-08KL
  • Manufacturer: Sae International Dba Sae International
General Description

The Bearing,plain,rod End, cataloged under National Stock Number 3120-01-396-3038, is classified within Federal Supply Class 3120 (Bearings, Plain, Unmounted) of the Bearings group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3120-01-396-3038
Primary Part NumberM81935/1-08KL
Item NameBearing,plain,rod End
FSC / FSG3120 / 31 — Bearings, Plain, Unmounted
ManufacturerSae International Dba Sae International
StatusACTIVE
Shank Thread Length1.4370 INCHES MINIMUM AND 1.4990 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
Bore Center to Shank End Distance2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM IN
Inner Member Width0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
Hardness Rating28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
Hardness Rating55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
Hardness Rating39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
Outer Member Width0.5100 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM IN
Style DesignatorBALL TYPE
Thread Diameter0.500 INCHES NOMINAL IN
Material Document and ClassificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT
Material Document and ClassificationAMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER
Material Document and ClassificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
Thread DirectionLEFT-HAND
Specification/standard Data81349-MIL-B-81935/1A GOVERNMENT SPECIFICATION A
Shank StyleEXTERNALLY THREADED
Surface TreatmentCADMIUM AND CHROMATE ROD END BODY
Thread Class3A A
Thread Quantity Per Inch20
Static Radial Load Rating19500 POUNDS LBS
Bore Diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
MaterialPLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
MaterialSTEEL COMP E4340 ROD END BODY
MaterialSTEEL COMP 440C INNER MEMBER
MaterialSTEEL COMP 630 RACE INSERT
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Outer Member Outside Diameter1.3270 INCHES MINIMUM AND 1.3470 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
M81935/1-08KL PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
M81935/1-08KL 3/9 Design control — primary reference
U.S. Government activity
M81935/1-08KL 5/9 Secondary reference
U.S. Government activity
MIL-B-81935/1 5/9 Secondary reference
U.S. Government activity
AS81935 5/9 Secondary reference
U.S. Government activity
SAE-AS81935/1 3/1 Design control — primary reference
Sae International Dba Sae International
AS81935 5/1 Secondary reference
Sae International Dba Sae International

Frequently Asked Questions

What is NSN 3120-01-396-3038?

NSN 3120-01-396-3038 is a Bearing,plain,rod End, manufactured by Sae International Dba Sae International, classified under FSC 3120, Bearings, Plain, Unmounted. Status: active.

What part numbers are listed for NSN 3120-01-396-3038?

NSN 3120-01-396-3038 has 1 manufacturer part number on file: M81935/1-08KL (Sae International Dba Sae International).

What are the specifications of M81935/1-08KL?

Key specifications for M81935/1-08KL: Shank Thread Length: 1.4370 INCHES MINIMUM AND 1.4990 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY; Bore Center to Shank End Distance: 2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM IN; Inner Member Width: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN. 27 specifications are documented in the U.S. Government catalog.

Is NSN 3120-01-396-3038 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com