The Bearing,plain,rod End, cataloged under National Stock Number 3120-01-325-2833, is classified within Federal Supply Class 3120 (Bearings, Plain, Unmounted) of the Bearings group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 5 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3120-01-325-2833 |
| Primary Part Number | M81935/5-04 |
| Item Name | Bearing,plain,rod End |
| FSC / FSG | 3120 / 31 — Bearings, Plain, Unmounted |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Shank Thread Length | 0.7500 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Bore Center to Shank End Distance | 1.3280 INCHES MINIMUM AND 1.3480 INCHES MAXIMUM IN |
| Inner Member Width | 0.3410 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM IN |
| Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| Outer Member Width | 0.2550 INCHES MINIMUM AND 0.2650 INCHES MAXIMUM IN |
| Style Designator | BALL TYPE |
| Thread Diameter | 0.2500 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Shank Width Across Wrench Flats | 0.4300 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 81349-MIL-B-81935/5 GOVERNMENT SPECIFICATION |
| Shank Style | INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Bore Diameter | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN |
| Material | STEEL COMP E4340 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Inspection Hole Center to End Distance | 0.2920 INCHES MINIMUM AND 0.3320 INCHES MAXIMUM IN |
| Outer Member Outside Diameter | 0.8170 INCHES MINIMUM AND 0.8370 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| M81935/5-04 PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| M81935/5-4 | 3/9 Design control — primary reference U.S. Government activity |
| AS81935 | 5/9 Secondary reference U.S. Government activity |
| AS81935 | 5/1 Secondary reference Sae International Dba Sae International |
| M81935/5-4 | 5/9 Secondary reference U.S. Government activity |
| M81935/5-4 | 5/9 Secondary reference Sae International Dba Sae International |
| M8193515-04 | 5/9 Secondary reference Sae International Dba Sae International |
| MIL-B-81935/5 | 5/9 Secondary reference U.S. Government activity |
| SAE-AS81935/5 | 3/1 Design control — primary reference Sae International Dba Sae International |
NSN 3120-01-325-2833 is a Bearing,plain,rod End, manufactured by Sae International Dba Sae International, classified under FSC 3120, Bearings, Plain, Unmounted. Status: active.
NSN 3120-01-325-2833 has 1 manufacturer part number on file: M81935/5-04 (Sae International Dba Sae International).
5 possible matches (shared part number, not a government interchangeability claim): 3120-01-336-2299, 3120-01-424-2405, 3120-01-424-2440. Verify interchangeability with system specifications before substitution.
Key specifications for M81935/5-04: Shank Thread Length: 0.7500 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Bore Center to Shank End Distance: 1.3280 INCHES MINIMUM AND 1.3480 INCHES MAXIMUM IN; Inner Member Width: 0.3410 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.