PartsTable TECHNICAL DATA SHEET
NSN 3120-01-280-5526Government record, cited

Bearing, Plain, Rod End3120-01-280-5526

NSN 3120-01-280-5526 · NIIN 012805526 · Part number M81935/2-06K
Sae International Dba Sae International · FSC 3120 — Bearings, Plain, Unmounted · FSG 31 — Bearings · CAGE 0U583
Government record, cited
NSN 3120-01-280-5526 — this item is cataloged by the U.S. Government under National Stock Number 3120-01-280-5526. Manufacturer of record part number: M81935/2-06K.
Also searched as  3120-01-280-5526 · 3120012805526 · NIIN 012805526 · 01-280-5526 · FSC 3120 Bearings, Plain, Unmounted · CAGE 0U583 · M81935/2-06K · AS81935 · MIL-B-81935/2
Nearby stock numbers  ·
Features
  • Bearing,plain,rod End — FSC 3120
  • Shank Thread Length: 1.0000 INCHES MINIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
  • Bore Center to Shank End Distance: 1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM IN
  • Inner Member Width: 0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
  • Hardness Rating: 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
  • Hardness Rating: 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
  • Hardness Rating: 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
Identification
  • NSN: 3120-01-280-5526
  • NIIN: 012805526
  • FSC: 3120 — Bearings, Plain, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: M81935/2-06K
  • Manufacturer: Sae International Dba Sae International
General Description

The Bearing,plain,rod End, cataloged under National Stock Number 3120-01-280-5526, is classified within Federal Supply Class 3120 (Bearings, Plain, Unmounted) of the Bearings group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3120-01-280-5526
Primary Part NumberM81935/2-06K
Item NameBearing,plain,rod End
FSC / FSG3120 / 31 — Bearings, Plain, Unmounted
ManufacturerSae International Dba Sae International
StatusACTIVE
Shank Thread Length1.0000 INCHES MINIMUM IN
Surface Treatment Document and ClassificationQQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
Bore Center to Shank End Distance1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM IN
Inner Member Width0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
Hardness Rating28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
Hardness Rating55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
Hardness Rating39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
Outer Member Width0.4110 INCHES MINIMUM AND 0.4210 INCHES MAXIMUM IN
Style DesignatorBALL TYPE
Thread Diameter0.375 INCHES NOMINAL IN
Material Document and ClassificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT
Material Document and ClassificationAMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER
Material Document and ClassificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
Shank Width Across Wrench Flats0.5520 INCHES MINIMUM AND 0.5640 INCHES MAXIMUM IN
Thread DirectionRIGHT-HAND
Specification/standard Data81349-MIL-B-81935/2 GOVERNMENT SPECIFICATION
Shank StyleINTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE
Surface TreatmentCADMIUM AND CHROMATE ROD END BODY
Thread Class3B
Thread Quantity Per Inch24
Static Radial Load Rating8550 POUNDS LBS
Bore Diameter0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
MaterialPLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
MaterialSTEEL COMP E4340 ROD END BODY
MaterialSTEEL COMP 440C INNER MEMBER
MaterialSTEEL COMP 630 RACE INSERT
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Inspection Hole Center to End Distance0.4170 INCHES MINIMUM AND 0.4570 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3120-01-338-2756M81935/2-16K POSSIBLE MATCH
BEARING,PLAIN,ROD END
Possible match (shared part number)Sae International Dba Sae International
3120-01-346-5607M81935/2-16L POSSIBLE MATCH
BEARING,PLAIN,ROD END
Possible match (shared part number)Sae International Dba Sae International
3120-01-407-5724AS81935/2-03K POSSIBLE MATCH
BEARING,PLAIN,ROD END
Possible match (shared part number)Sae International Dba Sae International
Cross-Reference Index
Part NumberManufacturer
M81935/2-06K PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
AS81935 5/9 Secondary reference
U.S. Government activity
M81935/2-06K 3/9 Design control — primary reference
U.S. Government activity
MIL-B-81935/2 5/9 Secondary reference
U.S. Government activity
M81935/2-06K 5/9 Secondary reference
U.S. Government activity
AS81935 5/1 Secondary reference
Sae International Dba Sae International
SAE-AS81935/2 3/1 Design control — primary reference
Sae International Dba Sae International
Related Parts
3120-01-338-2756POSSIBLE MATCH
BEARING,PLAIN,ROD END
M81935/2-16K
3120-01-346-5607POSSIBLE MATCH
BEARING,PLAIN,ROD END
M81935/2-16L
3120-01-407-5724POSSIBLE MATCH
BEARING,PLAIN,ROD END
AS81935/2-03K

Frequently Asked Questions

What is NSN 3120-01-280-5526?

NSN 3120-01-280-5526 is a Bearing,plain,rod End, manufactured by Sae International Dba Sae International, classified under FSC 3120, Bearings, Plain, Unmounted. Status: active.

What part numbers are listed for NSN 3120-01-280-5526?

NSN 3120-01-280-5526 has 1 manufacturer part number on file: M81935/2-06K (Sae International Dba Sae International).

What NSN replaces 3120-01-280-5526?

3 possible matches (shared part number, not a government interchangeability claim): 3120-01-338-2756, 3120-01-346-5607, 3120-01-407-5724. Verify interchangeability with system specifications before substitution.

What are the specifications of M81935/2-06K?

Key specifications for M81935/2-06K: Shank Thread Length: 1.0000 INCHES MINIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY; Bore Center to Shank End Distance: 1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM IN; Inner Member Width: 0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN. 28 specifications are documented in the U.S. Government catalog.

Is NSN 3120-01-280-5526 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com