PartsTable TECHNICAL DATA SHEET
NSN 3120-01-251-3012Government record, cited

Bearing, Plain, Rod End3120-01-251-3012

NSN 3120-01-251-3012 · NIIN 012513012 · Part number M81935/1-16K
Sae International Dba Sae International · FSC 3120 — Bearings, Plain, Unmounted · FSG 31 — Bearings · CAGE 0U583
Government record, cited
NSN 3120-01-251-3012 — this item is cataloged by the U.S. Government under National Stock Number 3120-01-251-3012. Manufacturer of record part number: M81935/1-16K.
Also searched as  3120-01-251-3012 · 3120012513012 · NIIN 012513012 · 01-251-3012 · FSC 3120 Bearings, Plain, Unmounted · CAGE 0U583 · M81935/1-16K · AS81935 · AS81935 · SAE-AS81935/1
Nearby stock numbers  ·
Features
  • Bearing,plain,rod End — FSC 3120
  • Shank Thread Length: 2.3120 INCHES MINIMUM AND 2.3740 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
  • Bore Center to Shank End Distance: 4.1150 INCHES MINIMUM AND 4.1350 INCHES MAXIMUM IN
  • Inner Member Width: 1.3730 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
  • Hardness Rating: 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
  • Hardness Rating: 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
  • Hardness Rating: 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OUTER RING
Identification
  • NSN: 3120-01-251-3012
  • NIIN: 012513012
  • FSC: 3120 — Bearings, Plain, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: M81935/1-16K
  • Manufacturer: Sae International Dba Sae International
General Description

The Bearing,plain,rod End, cataloged under National Stock Number 3120-01-251-3012, is classified within Federal Supply Class 3120 (Bearings, Plain, Unmounted) of the Bearings group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3120-01-251-3012
Primary Part NumberM81935/1-16K
Item NameBearing,plain,rod End
FSC / FSG3120 / 31 — Bearings, Plain, Unmounted
ManufacturerSae International Dba Sae International
StatusACTIVE
Shank Thread Length2.3120 INCHES MINIMUM AND 2.3740 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
Bore Center to Shank End Distance4.1150 INCHES MINIMUM AND 4.1350 INCHES MAXIMUM IN
Inner Member Width1.3730 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
Hardness Rating55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
Hardness Rating39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
Hardness Rating28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OUTER RING
Outer Member Width1.0100 INCHES MINIMUM AND 1.0200 INCHES MAXIMUM IN
Style DesignatorBALL TYPE
Thread Diameter1.250 INCHES NOMINAL IN
Material Document and ClassificationAMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER
Material Document and ClassificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
Material Document and ClassificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
Thread DirectionRIGHT-HAND
Specification/standard Data81349-MIL-B-81935/1A GOVERNMENT SPECIFICATION A
Shank StyleEXTERNALLY THREADED
Surface TreatmentCADMIUM AND CHROMATE ROD END BODY
Thread Class3A A
Thread Quantity Per Inch12
Bore Diameter0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
MaterialPLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
MaterialSTEEL COMP E4340 ROD END BODY
MaterialSTEEL COMP 440C INNER MEMBER
MaterialSTEEL COMP 630 OUTER RING
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Outer Member Outside Diameter2.7650 INCHES MINIMUM AND 2.7850 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL Q — CCL Item — Commerce Control List
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
M81935/1-16K PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
M81935/1-16K 3/9 Design control — primary reference
U.S. Government activity
M81935/1-16K 5/9 Secondary reference
U.S. Government activity
AS81935 5/1 Secondary reference
Sae International Dba Sae International
AS81935 5/9 Secondary reference
U.S. Government activity
SAE-AS81935/1 3/1 Design control — primary reference
Sae International Dba Sae International
No interchangeability data on file.
Other items in FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288
3120-00-001-1288 · Item name not on file
3120-00-001-1835
3120-00-001-1835 · Item name not on file
3120-00-001-1838
3120-00-001-1838 · Item name not on file
3120-00-001-1928
3120-00-001-1928 · Item name not on file
3120-00-001-1934
3120-00-001-1934 · Item name not on file
3120-00-001-3933
3120-00-001-3933 · Item name not on file
3120-00-001-3937
3120-00-001-3937 · Item name not on file
3120-00-001-3938
3120-00-001-3938 · Item name not on file

Frequently Asked Questions

What is NSN 3120-01-251-3012?

NSN 3120-01-251-3012 is a Bearing,plain,rod End, manufactured by Sae International Dba Sae International, classified under FSC 3120, Bearings, Plain, Unmounted. Status: active.

What part numbers are listed for NSN 3120-01-251-3012?

NSN 3120-01-251-3012 has 1 manufacturer part number on file: M81935/1-16K (Sae International Dba Sae International).

What are the specifications of M81935/1-16K?

Key specifications for M81935/1-16K: Shank Thread Length: 2.3120 INCHES MINIMUM AND 2.3740 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY; Bore Center to Shank End Distance: 4.1150 INCHES MINIMUM AND 4.1350 INCHES MAXIMUM IN; Inner Member Width: 1.3730 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN. 26 specifications are documented in the U.S. Government catalog.

Is NSN 3120-01-251-3012 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 3120-01-251-3012?

NSN 3120-01-251-3012 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com