PartsTable TECHNICAL DATA SHEET
NSN 3120-01-042-1880Government record, cited

Bushing, Sleeve3120-01-042-1880

NSN 3120-01-042-1880 · NIIN 010421880
FSC 3120 — Bearings, Plain, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3120-01-042-1880 · 3120010421880 · NIIN 010421880 · 01-042-1880 · FSC 3120 Bearings, Plain, Unmounted · A51B53524-37 · A51B53524-37 · A51B53524-37
Nearby stock numbers  ·
Features
  • Bushing,sleeve — FSC 3120
  • Surface Finish: 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
  • Surface Finish: 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
  • Corner Shape: CHAMFERED INSIDE LEFT CORNER
  • Corner Shape: SQUARE INSIDE RIGHT CORNER
  • Corner Shape: SQUARE LEFT FLANGE BODY CORNER
  • Corner Shape: SQUARE OUTSIDE RIGHT CORNER
  • Corner Shape: SQUARE OUTSIDE LEFT CORNER
Identification
  • NSN: 3120-01-042-1880
  • NIIN: 010421880
  • FSC: 3120 — Bearings, Plain, Unmounted
  • FSG: 31 — Bearings
General Description

The Bushing,sleeve, cataloged under National Stock Number 3120-01-042-1880, is classified within Federal Supply Class 3120 (Bearings, Plain, Unmounted) of the Bearings group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3120-01-042-1880
Item NameBushing,sleeve
FSC / FSG3120 / 31 — Bearings, Plain, Unmounted
StatusACTIVE
Surface Finish125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
Surface Finish125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
Corner ShapeCHAMFERED INSIDE LEFT CORNER
Corner ShapeSQUARE INSIDE RIGHT CORNER
Corner ShapeSQUARE LEFT FLANGE BODY CORNER
Corner ShapeSQUARE OUTSIDE RIGHT CORNER
Corner ShapeSQUARE OUTSIDE LEFT CORNER
Corner ShapeSQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
Surface Treatment Document and ClassificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Flange Outside Diameter0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
Body Outside Diameter0.4375 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
Hardness Rating33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL
Style DesignatorSOLID, EXTERNAL FLANGE ONE END
Body Inside Diameter0.3680 INCHES MINIMUM AND 0.3700 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OVERALL
Flange Width0.0610 INCHES MINIMUM AND 0.0640 INCHES MAXIMUM IN
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialSTEEL COMP 4340 OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
A51B53524-37 3/9 Design control — primary reference
Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems
A51B53524-37 C/1 Advisory reference — outside the item-of-supply concept
Northrop Grumman Systems Corporation
A51B53524-37 5/9 Secondary reference
Northrop Grumman Systems Corporation
No interchangeability data on file.
Other items in FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288
3120-00-001-1288 · Item name not on file
3120-00-001-1835
3120-00-001-1835 · Item name not on file
3120-00-001-1838
3120-00-001-1838 · Item name not on file
3120-00-001-1928
3120-00-001-1928 · Item name not on file
3120-00-001-1934
3120-00-001-1934 · Item name not on file
3120-00-001-3933
3120-00-001-3933 · Item name not on file
3120-00-001-3937
3120-00-001-3937 · Item name not on file
3120-00-001-3938
3120-00-001-3938 · Item name not on file

Frequently Asked Questions

What is NSN 3120-01-042-1880?

NSN 3120-01-042-1880 is a Bushing,sleeve, classified under FSC 3120, Bearings, Plain, Unmounted. Status: active.

What are the specifications of 3120-01-042-1880?

Key specifications for 3120-01-042-1880: Surface Finish: 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY; Surface Finish: 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE; Corner Shape: CHAMFERED INSIDE LEFT CORNER; Corner Shape: SQUARE INSIDE RIGHT CORNER. 18 specifications are documented in the U.S. Government catalog.

Is NSN 3120-01-042-1880 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com