The Bearing,plain,rod End, cataloged under National Stock Number 3120-01-030-3383, is classified within Federal Supply Class 3120 (Bearings, Plain, Unmounted) of the Bearings group. The manufacturer of record is New Hampshire Ball Bearings Inc Div Astro Division. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3120-01-030-3383 |
| Primary Part Number | ADNE8-302W |
| Item Name | Bearing,plain,rod End |
| FSC / FSG | 3120 / 31 — Bearings, Plain, Unmounted |
| Manufacturer | New Hampshire Ball Bearings Inc Div Astro Division |
| Status | ACTIVE |
| Shank Thread Length | 1.9900 INCHES MINIMUM AND 2.0300 INCHES MAXIMUM IN |
| Bore Center to Shank End Distance | 3.3020 INCHES MINIMUM AND 3.3220 INCHES MAXIMUM IN |
| Inner Member Width | 0.9350 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM IN |
| Hardness Rating | 35.5 ROCKWELL C MINIMUM AND 41.5 ROCKWELL C MAXIMUM INTERNAL ROD END BODY |
| Outer Member Width | 0.6250 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM IN |
| Style Designator | BALL TYPE |
| Thread Diameter | 0.562 INCHES NOMINAL IN |
| Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| Material Document and Classification | 204-076-428-3,97499 MFR REF SINGLE MATERIAL RESPONSE RACE LINER |
| Material Document and Classification | AMS5614 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT |
| Material Document and Classification | AMS5643 ASSN STD SINGLE MATERIAL RESPONSE INTERNAL ROD END BODY |
| Thread Direction | RIGHT-HAND |
| Shank Style | EXTERNALLY THREADED |
| Thread Class | 3A A |
| Test Data Document | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 18 |
| Bore Diameter | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN |
| Material | PLASTIC TETRAFLUOROETHYLENE RACE LINER |
| Material | STEEL COMP 410 RACE INSERT |
| Material | STEEL COMP 440C INNER MEMBER |
| Material | STEEL INTERNAL ROD END BODY |
| Thread Series Designator | UNF |
| Outer Member Outside Diameter | 1.7900 INCHES MINIMUM AND 1.8100 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | F |
| Part Number | Manufacturer |
|---|---|
| ADNE8-302W PRIMARY | New Hampshire Ball Bearings Inc Div Astro Division (USA) |
| ATNE8-302WDHS PRIMARY | New Hampshire Ball Bearings Inc Div Astro Division (USA) |
| Reference | Meaning |
|---|---|
| 204-076-428-5 | 1/2 Source control — Government-approved source U.S. Government activity |
| 204-076-428-005 | 5/2 Secondary reference U.S. Government activity |
NSN 3120-01-030-3383 is a Bearing,plain,rod End, manufactured by New Hampshire Ball Bearings Inc Div Astro Division, classified under FSC 3120, Bearings, Plain, Unmounted. Status: active.
NSN 3120-01-030-3383 has 2 manufacturer part numbers on file: ADNE8-302W (New Hampshire Ball Bearings Inc Div Astro Division), ATNE8-302WDHS (New Hampshire Ball Bearings Inc Div Astro Division).
Key specifications for ADNE8-302W: Shank Thread Length: 1.9900 INCHES MINIMUM AND 2.0300 INCHES MAXIMUM IN; Bore Center to Shank End Distance: 3.3020 INCHES MINIMUM AND 3.3220 INCHES MAXIMUM IN; Inner Member Width: 0.9350 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM IN; Hardness Rating: 35.5 ROCKWELL C MINIMUM AND 41.5 ROCKWELL C MAXIMUM INTERNAL ROD END BODY. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.