PartsTable TECHNICAL DATA SHEET
NSN 3120-01-009-1325Government record, cited

Bearing, Plain, Rod End3120-01-009-1325

NSN 3120-01-009-1325 · NIIN 010091325 · Part number A51H10564-1
Northrop Grumman Systems Corporation · FSC 3120 — Bearings, Plain, Unmounted · FSG 31 — Bearings · CAGE 79RG9
Government record, cited
NSN 3120-01-009-1325 — this item is cataloged by the U.S. Government under National Stock Number 3120-01-009-1325. Manufacturer of record part number: A51H10564-1.
Also searched as  3120-01-009-1325 · 3120010091325 · NIIN 010091325 · 01-009-1325 · FSC 3120 Bearings, Plain, Unmounted · CAGE 79RG9 · A51H10564-1
Nearby stock numbers  ·
Features
  • Bearing,plain,rod End — FSC 3120
  • Shank Thread Length: 1.2020 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER
  • Bore Center to Shank End Distance: 1.8120 INCHES NOMINAL IN
  • Inner Member Width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
  • Hardness Rating: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM INNER MEMBER
  • Hardness Rating: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM RACE INSERT
  • Hardness Rating: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM ROD END BODY
Identification
  • NSN: 3120-01-009-1325
  • NIIN: 010091325
  • FSC: 3120 — Bearings, Plain, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: A51H10564-1
  • Manufacturer: Northrop Grumman Systems Corporation
General Description

The Bearing,plain,rod End, cataloged under National Stock Number 3120-01-009-1325, is classified within Federal Supply Class 3120 (Bearings, Plain, Unmounted) of the Bearings group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3120-01-009-1325
Primary Part NumberA51H10564-1
Item NameBearing,plain,rod End
FSC / FSG3120 / 31 — Bearings, Plain, Unmounted
ManufacturerNorthrop Grumman Systems Corporation
StatusACTIVE
Shank Thread Length1.2020 INCHES NOMINAL IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER
Bore Center to Shank End Distance1.8120 INCHES NOMINAL IN
Inner Member Width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
Hardness Rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM INNER MEMBER
Hardness Rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM RACE INSERT
Hardness Rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM ROD END BODY
Outer Member Width0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM IN
Style DesignatorBALL TYPE
Thread Diameter0.437 INCHES NOMINAL IN
Material Document and ClassificationMIL-S-7097 MIL SPEC SINGLE MATERIAL RESPONSE INNER MEMBER
Thread DirectionRIGHT-HAND
Shank StyleEXTERNALLY THREADED
Surface TreatmentCADMIUM RACE INSERT
Surface TreatmentPASSIVATE ROD END BODY
Surface TreatmentCADMIUM INNER MEMBER
Thread Class3A A
Test Data Document81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch20
Bore Diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
MaterialSTEEL COMP XM-12 ROD END BODY
MaterialRUBBER RACE LINER
MaterialSTEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1025 INNER MEMBER
MaterialSTEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1025 RACE INSERT
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Outer Member Outside Diameter0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
A51H10564-1 PRIMARY Northrop Grumman Systems Corporation (USA)
Reference documents
ReferenceMeaning
A51H10564-1 5/9 Secondary reference
Northrop Grumman Systems Corporation
A51H10564-1 3/9 Design control — primary reference
Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems
No interchangeability data on file.
Other items in FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288
3120-00-001-1288 · Item name not on file
3120-00-001-1835
3120-00-001-1835 · Item name not on file
3120-00-001-1838
3120-00-001-1838 · Item name not on file
3120-00-001-1928
3120-00-001-1928 · Item name not on file
3120-00-001-1934
3120-00-001-1934 · Item name not on file
3120-00-001-3933
3120-00-001-3933 · Item name not on file
3120-00-001-3937
3120-00-001-3937 · Item name not on file
3120-00-001-3938
3120-00-001-3938 · Item name not on file

Frequently Asked Questions

What is NSN 3120-01-009-1325?

NSN 3120-01-009-1325 is a Bearing,plain,rod End, manufactured by Northrop Grumman Systems Corporation, classified under FSC 3120, Bearings, Plain, Unmounted. Status: active.

What part numbers are listed for NSN 3120-01-009-1325?

NSN 3120-01-009-1325 has 1 manufacturer part number on file: A51H10564-1 (Northrop Grumman Systems Corporation).

What are the specifications of A51H10564-1?

Key specifications for A51H10564-1: Shank Thread Length: 1.2020 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER; Bore Center to Shank End Distance: 1.8120 INCHES NOMINAL IN; Inner Member Width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN. 26 specifications are documented in the U.S. Government catalog.

Is NSN 3120-01-009-1325 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com