PartsTable TECHNICAL DATA SHEET
NSN 3120-00-151-4839Government record, cited

Bearing, Plain, Rod End3120-00-151-4839

NSN 3120-00-151-4839 · NIIN 001514839 · Part number AREM10-57FN
New Hampshire Ball Bearings Inc Div Astro Division · FSC 3120 — Bearings, Plain, Unmounted · FSG 31 — Bearings · CAGE 15860
Government record, cited
NSN 3120-00-151-4839 — this item is cataloged by the U.S. Government under National Stock Number 3120-00-151-4839. Manufacturer of record part number: AREM10-57FN.
Also searched as  3120-00-151-4839 · 3120001514839 · NIIN 001514839 · 00-151-4839 · FSC 3120 Bearings, Plain, Unmounted · CAGE 15860 · AREM10-57FN · KE10-11FN · GB525G10FN · HE10FN
Nearby stock numbers  ·
Features
  • Bearing,plain,rod End — FSC 3120
  • Shank Thread Length: 1.6870 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
  • Bore Center to Shank End Distance: 2.6560 INCHES NOMINAL IN
  • Inner Member Width: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
  • Hardness Rating: 57.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM INNER MEMBER
  • Outer Member Width: 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
Identification
  • NSN: 3120-00-151-4839
  • NIIN: 001514839
  • FSC: 3120 — Bearings, Plain, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: AREM10-57FN
  • Manufacturer: New Hampshire Ball Bearings Inc Div Astro Division
General Description

The Bearing,plain,rod End, cataloged under National Stock Number 3120-00-151-4839, is classified within Federal Supply Class 3120 (Bearings, Plain, Unmounted) of the Bearings group. The manufacturer of record is New Hampshire Ball Bearings Inc Div Astro Division. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3120-00-151-4839
Primary Part NumberAREM10-57FN
Item NameBearing,plain,rod End
FSC / FSG3120 / 31 — Bearings, Plain, Unmounted
ManufacturerNew Hampshire Ball Bearings Inc Div Astro Division
StatusACTIVE
Shank Thread Length1.6870 INCHES NOMINAL IN
Surface Treatment Document and ClassificationQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
Bore Center to Shank End Distance2.6560 INCHES NOMINAL IN
Inner Member Width0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
Hardness Rating57.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM INNER MEMBER
Outer Member Width0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
Style DesignatorBALL TYPE
Thread Diameter0.625 INCHES NOMINAL IN
Material Document and ClassificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
Material Document and ClassificationFED STD 66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER
Material Document and ClassificationFED STD 66 FED STD SINGLE MATERIAL RESPONSE ROD END BODY
Lubrication FeatureGROOVE ROD END BODY
Features ProvidedEXTERNAL LUBRICATION FITTING
Thread DirectionRIGHT-HAND
Shank StyleEXTERNALLY THREADED
Surface TreatmentCADMIUM ROD END BODY
Surface TreatmentCHROMIUM INNER MEMBER
Thread Class3A A
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch18
Static Radial Load Rating16000 POUNDS LBS
Bore Diameter0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
MaterialGREASE LUBRICATION
MaterialSTEEL COMP 4130 ROD END BODY
MaterialSTEEL COMP E52100 INNER MEMBER
Thread Series DesignatorUNF
Outer Member Outside Diameter1.4900 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
AREM10-57FN PRIMARY New Hampshire Ball Bearings Inc Div Astro Division (USA)
GB525G10FN Northrop Grumman Systems Corporation (USA)
HE10FN PRIMARY U S Bearings (USA)
Reference documents
ReferenceMeaning
KE10-11FN 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288
3120-00-001-1288 · Item name not on file
3120-00-001-1835
3120-00-001-1835 · Item name not on file
3120-00-001-1838
3120-00-001-1838 · Item name not on file
3120-00-001-1928
3120-00-001-1928 · Item name not on file
3120-00-001-1934
3120-00-001-1934 · Item name not on file
3120-00-001-3933
3120-00-001-3933 · Item name not on file
3120-00-001-3937
3120-00-001-3937 · Item name not on file
3120-00-001-3938
3120-00-001-3938 · Item name not on file

Frequently Asked Questions

What is NSN 3120-00-151-4839?

NSN 3120-00-151-4839 is a Bearing,plain,rod End, manufactured by New Hampshire Ball Bearings Inc Div Astro Division, classified under FSC 3120, Bearings, Plain, Unmounted. Status: active.

What part numbers are listed for NSN 3120-00-151-4839?

NSN 3120-00-151-4839 has 3 manufacturer part numbers on file: AREM10-57FN (New Hampshire Ball Bearings Inc Div Astro Division), GB525G10FN (Northrop Grumman Systems Corporation), HE10FN (U S Bearings).

What are the specifications of AREM10-57FN?

Key specifications for AREM10-57FN: Shank Thread Length: 1.6870 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY; Bore Center to Shank End Distance: 2.6560 INCHES NOMINAL IN; Inner Member Width: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN. 28 specifications are documented in the U.S. Government catalog.

Is NSN 3120-00-151-4839 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com