PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 312-10755043
312-10755043 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, outside_diameter: 0.675 INCHES MINIMUM AND 0.725 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, cross-sectional_thickness: 0.032 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-003-1074, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
312-10755043
NSN: 5330-00-003-1074
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
outside_diameter0.675 INCHES MINIMUM AND 0.725 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
cross-sectional_thickness0.032 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-003-1074
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 312-10755043 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.675 INCHES MINIMUM AND 0.725 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
APERTURE DIAMETER: 0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL IN
OUTSIDE DIAMETER0.675 INCHES MINIMUM AND 0.725 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORCIRCULAR
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
APERTURE DIAMETER0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
5005Interchangeable
interchangeable cross-reference
interchangeable
G26853Interchangeable
interchangeable cross-reference
interchangeable
17045-3Interchangeable
interchangeable cross-reference
interchangeable
10939Interchangeable
interchangeable cross-reference
interchangeable
CD508Interchangeable
interchangeable cross-reference
interchangeable
CP130Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 312-10755043?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 312-10755043?
312-10755043 is a GASKET.
What parts can replace 312-10755043?
There are 19 known substitutes for 312-10755043: 5005, G26853, 17045-3 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 312-10755043?
312-10755043 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-003-1074. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 312-10755043

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026