PartsTable
Technical Data Sheet
Download PDF

3116-H — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3116-H: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, nut_style: HEXAGON, nut_height: 0.156 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-472-6721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3116-H
NSN: 5310-01-472-6721
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
nut_styleHEXAGON
nut_height0.156 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.500 INCHES NOMINAL IN
nominal_thread_size0.312 INCHES IN
bearing_surface_typeCHAMFERED
thread_pitch_diameters+0.2854 TO 0.2902 INCHES IN
end_item_identificationVALVE:WSD; NIMITZ CLASS CVN
thread_quantity_per_inch24
NSN5310-01-472-6721
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3116-H · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.500 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD PITCH DIAMETERS: +0.2854 TO 0.2902 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-B16 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
NUT HEIGHT: 0.156 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.500 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD PITCH DIAMETERS+0.2854 TO 0.2902 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-B16 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
NUT HEIGHT0.156 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
END ITEM IDENTIFICATIONVALVE:WSD; NIMITZ CLASS CVN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
84360-.75 IN PC 15Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3116-H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3116-H?
3116-H is a NUT,PLAIN,HEXAGON.
What parts can replace 3116-H?
There is 1 known substitute for 3116-H: 84360-.75 IN PC 15. Substitute compatibility should be verified for your specific system.
What is the NSN for 3116-H?
3116-H is cataloged in the U.S. Government catalog under NSN 5310-01-472-6721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3116-H