3115: CAPACITOR,VARIABLE,CERAMIC DIELE.
The cable protector not only protects cables running over the floor but also prevents tripping. It has sloping edges with non-skid ridges and three large cable ducts to separate data and power cables to prevent interference. - Curved top with ridges provides grip when stepped on - Suitable for 6 cables of 7 mm thickness - Enables optimal separation of data and power cables - Easy to attach to the floor with the adhesive tape - Dimensions (w x d x h): 83 x 1500 x 15 mm This part is cataloged in the U.S.
Government catalog under NSN 3110-00-114-6086, indicating validated use in U.S. government and defense logistics supply chains.
| phase | THREE |
| end_type | DOUBLE BIT SCREW CLAMP FIRST END |
| material | RUBBER INSERT |
| bore_type | STRAIGHT |
| end_style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| body_style | ANGLE, SHAPE, INTERNAL COUPLING |
| bore_shape | STRAIGHT |
| drive_type | POWER |
| port_style | GASKET SEAL SINGLE PORT |
| shell_type | SOLID |
| design_type | HORN SINGLE ANTENNA ELEMENT |
| load_rating | 9.000 POUNDS MINIMUM AND 10.000 POUNDS MAXIMUM LBS |
| NSN | 3110-00-114-6086 |
| BEARING SEAL TYPE | LABYRINTH |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 1.1880 INCHES NOMINAL IN |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| SURFACE FINISH | GROUND |
| STYLE DESIGNATOR | SINGLE ROW BALL, EXTERNAL SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH SETSCREW IN INNER RING |
| OVERALL OUTSIDE DIAMETER | 3.9362 INCHES MINIMUM AND 3.9370 INCHES MAXIMUM IN |
| BORE SHAPE | STRAIGHT |
| LOAD DIRECTION | RADIAL |
| SEAL QUANTITY | 2 |