PartsTable
Technical Data Sheet
Download PDF

3110PL1320150 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

3110PL1320150: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, stud_length: 0.6250 INCHES NOMINAL IN, thread_class: 3A A, stud_diameter: 0.1900 INCHES MINIMUM AND 0.1910 INCHES MAXIMUM IN, thread_length: 0.2500 INCHES MINIMUM IN, overall_length: 1.0313 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-274-5737, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3110PL1320150
NSN: 3110-01-274-5737
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL OVERALL
stud_length0.6250 INCHES NOMINAL IN
thread_class3A A
stud_diameter0.1900 INCHES MINIMUM AND 0.1910 INCHES MAXIMUM IN
thread_length0.2500 INCHES MINIMUM IN
overall_length1.0313 INCHES NOMINAL IN
outer_ring_width0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
special_featuresHEXAGONAL WRENCH SOCKET IN THE HEAD OF THE STUD; MEANS FOR RELUBRICATION
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
overall_outside_diameter0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
NSN3110-01-274-5737
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3110PL1320150 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.2500 INCHES MINIMUM IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
STUD LENGTH: 0.6250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
THREAD LENGTH0.2500 INCHES MINIMUM IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH1.0313 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
STUD LENGTH0.6250 INCHES NOMINAL IN
SPECIAL FEATURESHEXAGONAL WRENCH SOCKET IN THE HEAD OF THE STUD; MEANS FOR RELUBRICATION
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 1
CRB-8-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3110PL1320150?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3110PL1320150?
3110PL1320150 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace 3110PL1320150?
There is 1 known substitute for 3110PL1320150: CRB-8-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 3110PL1320150?
3110PL1320150 is cataloged in the U.S. Government catalog under NSN 3110-01-274-5737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3110PL1320150

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.