PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3110PL0670426
3110PL0670426 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_diameter: 1.0000 INCHES NOMINAL IN, overall_width: 0.8750 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, CLOSED END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-451-9586, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3110PL0670426
NSN: 3110-00-451-9586
FSC: 3110
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_diameter1.0000 INCHES NOMINAL IN
overall_width0.8750 INCHES NOMINAL IN
seal_quantity2
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, CLOSED END, DRAWN SHELL
bearing_seal_typeCONTACT
overall_outside_diameter1.2500 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-451-9586
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3110PL0670426 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.0000 INCHES NOMINAL IN
•
SEAL QUANTITY: 2
•
MATERIAL: STEEL RETAINER
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 1.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.0000 INCHES NOMINAL IN
SEAL QUANTITY2
MATERIALSTEEL RETAINER
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
MATERIALSTEEL ROLLER
OVERALL OUTSIDE DIAMETER1.2500 INCHES NOMINAL IN
OVERALL WIDTH0.8750 INCHES NOMINAL IN
MATERIALSTEEL OUTER RING
BEARING SEAL TYPECONTACT
MATERIALRUBBER SYNTHETIC SEAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
MIL-G-81322Interchangeable
interchangeable cross-reference
interchangeable
G090167Interchangeable
interchangeable cross-reference
interchangeable
GRADE AInterchangeable
interchangeable cross-reference
interchangeable
G-0395SH43Interchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-81322Interchangeable
interchangeable cross-reference
interchangeable
AEROSHELL 22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3110PL0670426?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3110PL0670426?
3110PL0670426 is a BEARING,ROLLER,NEEDLE.
What parts can replace 3110PL0670426?
There are 20 known substitutes for 3110PL0670426: MIL-G-81322, G090167, GRADE A and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3110PL0670426?
3110PL0670426 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-451-9586. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3110PL0670426

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026