PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3110PL0138775
3110PL0138775 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_diameter: 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, alignment_type: RIGID, load_direction: RADIAL, inner_ring_width: 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, outer_ring_width: 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-522-7106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3110PL0138775
NSN: 3110-00-522-7106
FSC: 3110
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
bore_diameter0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
seal_quantity2
alignment_typeRIGID
load_directionRADIAL
inner_ring_width0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
outer_ring_width0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
overall_outside_diameter1.6245 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-522-7106
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3110PL0138775 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
ALIGNMENT TYPE: RIGID
•
BEARING SEAL TYPE: CONTACT
•
INNER RING WIDTH: 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
•
SEAL QUANTITY: 2
•
OUTER RING WIDTH: 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
•
LOAD DIRECTION: RADIAL
•
STYLE DESIGNATOR: SINGLE ROW INNER RING EXTENDED BOTH SIDES
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
ALIGNMENT TYPERIGID
BEARING SEAL TYPECONTACT
INNER RING WIDTH0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
SEAL QUANTITY2
OUTER RING WIDTH0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
MATERIALSTEEL COMP E52100 INNER RING
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
561-6404325-31Interchangeable
interchangeable cross-reference
interchangeable
MS27641-12Interchangeable
interchangeable cross-reference
interchangeable
AS7949Interchangeable
interchangeable cross-reference
interchangeable
KP12AE8454Interchangeable
Same NIIN cross-reference
interchangeable
KP12A-FS464Interchangeable
Same NIIN cross-reference
interchangeable
K659458-25Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3110PL0138775?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3110PL0138775?
3110PL0138775 is a BEARING,BALL,AIRFRAME.
What parts can replace 3110PL0138775?
There are 6 known substitutes for 3110PL0138775: 561-6404325-31, MS27641-12, AS7949 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3110PL0138775?
3110PL0138775 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-522-7106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3110PL0138775

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026