PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3110009667741
3110009667741 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, alignment_type: RIGID, special_features: OIL HOLE IN OUTER RING, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL, overall_outside_diameter: 1.5000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-966-7741, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3110009667741
NSN: 3110-00-966-7741
FSC: 3110
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
alignment_typeRIGID
special_featuresOIL HOLE IN OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter1.5000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-966-7741
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3110009667741 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 1.5000 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
BORE DIAMETER: 0.1875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESOIL HOLE IN OUTER RING
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL OUTSIDE DIAMETER1.5000 INCHES NOMINAL IN
OVERALL WIDTH0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
BORE DIAMETER0.1875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
10-6922Interchangeable
interchangeable cross-reference
interchangeable
10-25922Interchangeable
interchangeable cross-reference
interchangeable
72092Interchangeable
interchangeable cross-reference
interchangeable
6460027Interchangeable
interchangeable cross-reference
interchangeable
1953236Interchangeable
interchangeable cross-reference
interchangeable
6150007580332Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3110009667741?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3110009667741?
3110009667741 is a BEARING,ROLLER,NEEDLE.
What parts can replace 3110009667741?
There are 9 known substitutes for 3110009667741: 10-6922, 10-25922, 72092 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3110009667741?
3110009667741 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-966-7741. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3110009667741

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026