PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3110009298367
3110009298367 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_shape: STRAIGHT, bore_diameter: 20.00 MILLIMETERS NOMINAL MM, overall_width: 14.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-929-8367, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3110009298367
NSN: 3110-00-929-8367
FSC: 3110
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_shapeSTRAIGHT
bore_diameter20.00 MILLIMETERS NOMINAL MM
overall_width14.00 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresGROUND SEAL FACES ON INNER RACE; SPECIAL SEAL MATERIAL
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter47.00 MILLIMETERS NOMINAL MM
NSN3110-00-929-8367
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3110009298367 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 20.00 MILLIMETERS NOMINAL MM
•
BEARING SEAL TYPE: CONTACT
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
BORE DIAMETER20.00 MILLIMETERS NOMINAL MM
BEARING SEAL TYPECONTACT
SPECIAL FEATURESGROUND SEAL FACES ON INNER RACE; SPECIAL SEAL MATERIAL
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
SEAL QUANTITY2
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
AA59584/108JCBEInterchangeable
interchangeable cross-reference
interchangeable
FF-B-171/04J08C2BInterchangeable
interchangeable cross-reference
interchangeable
FF-B-171/04Interchangeable
interchangeable cross-reference
interchangeable
32435Interchangeable
interchangeable cross-reference
interchangeable
HHI435Interchangeable
interchangeable cross-reference
interchangeable
52-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3110009298367?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3110009298367?
3110009298367 is a BEARING,BALL,ANNULAR.
What parts can replace 3110009298367?
There are 18 known substitutes for 3110009298367: AA59584/108JCBE, FF-B-171/04J08C2B, FF-B-171/04 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3110009298367?
3110009298367 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-929-8367. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3110009298367

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026