PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3110009013092
3110009013092 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1090 OR STEEL COMP 1095 ROLLER, bore_diameter: 1.8755 INCHES MINIMUM AND 1.8768 INCHES MAXIMUM IN, overall_width: 0.9900 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE IN OUTER RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-901-3092, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3110009013092
NSN: 3110-00-901-3092
FSC: 3110
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
materialSTEEL COMP 1090 OR STEEL COMP 1095 ROLLER
bore_diameter1.8755 INCHES MINIMUM AND 1.8768 INCHES MAXIMUM IN
overall_width0.9900 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE IN OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter2.2495 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-901-3092
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3110009013092 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 1.8755 INCHES MINIMUM AND 1.8768 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 8615 OUTER RING
•
OVERALL OUTSIDE DIAMETER: 2.2495 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE IN OUTER RING
BORE DIAMETER1.8755 INCHES MINIMUM AND 1.8768 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 8615 OUTER RING
OVERALL OUTSIDE DIAMETER2.2495 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1090 OR STEEL COMP 1095 ROLLER
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL WIDTH0.9900 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
8130869Interchangeable
interchangeable cross-reference
interchangeable
MS17131Interchangeable
interchangeable cross-reference
interchangeable
A28229Interchangeable
interchangeable cross-reference
interchangeable
ASTM F 2162Interchangeable
interchangeable cross-reference
interchangeable
3110PL1161603Interchangeable
interchangeable cross-reference
interchangeable
B107X0HInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3110009013092?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3110009013092?
3110009013092 is a BEARING,ROLLER,NEEDLE.
What parts can replace 3110009013092?
There are 30 known substitutes for 3110009013092: 8130869, MS17131, A28229 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3110009013092?
3110009013092 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-901-3092. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3110009013092

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026