The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_diameter: 0.6250 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, load_direction: RADIAL, inner_ring_width: 0.8130 INCHES NOMINAL IN, outer_ring_width: 0.6250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-042-4803, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP E52100 OUTER RING |
| bore_diameter | 0.6250 INCHES NOMINAL IN |
| seal_quantity | 2 |
| alignment_type | SELF-ALIGNING |
| load_direction | RADIAL |
| inner_ring_width | 0.8130 INCHES NOMINAL IN |
| outer_ring_width | 0.6250 INCHES NOMINAL IN |
| special_features | 80 PCT. FULL OF MIL-G-81322,AXIAL PLAY 0.034 IN. MAX.,HEAT TREAT RINGS AND BALLS TO ROCKWELL C 60 TO 66 AND STABILIZED FOR OPERATION AT 250 DEG.F,10 DEG SELF-ALIGNING IN EITHER DIRECTION IN |
| style_designator | SINGLE ROW SELF ALIGNING SINGLE ROW INNER RING EXTENDED BOTH SIDES |
| bearing_seal_type | CONTACT |
| surface_treatment | CADMIUM EXPOSED SURFACES AS MOUNTED |
| self-alignment_location | INTERNAL |
| NSN | 3110-00-042-4803 |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| INNER RING WIDTH | 0.8130 INCHES NOMINAL IN |
| OUTER RING WIDTH | 0.6250 INCHES NOMINAL IN |
| BEARING SEAL TYPE | CONTACT |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LOAD DIRECTION | RADIAL |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS |
| SPECIAL FEATURES | 80 PCT. FULL OF MIL-G-81322,AXIAL PLAY 0.034 IN. MAX.,HEAT TREAT RINGS AND BALLS TO ROCKWELL C 60 TO 66 AND STABILIZED FOR OPERATION AT 250 DEG.F,10 DEG SELF-ALIGNING IN EITHER DIRECTION IN |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |