The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-706-7894, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-706-7894 |
| Item Name | Cam Follower,needle Bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Bearing Seal Type | CONTACT |
| Outer Ring Width | 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN |
| Internal Fit-Up Designation | STANDARD |
| Thread Length | 0.3590 INCHES NOMINAL IN |
| Style Designator | CAM FOLLOWER |
| Overall Outside Diameter | 0.7495 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.3125 INCHES IN |
| Stud Length | 0.9215 INCHES MINIMUM AND 0.9685 INCHES MAXIMUM IN |
| Alignment Type | RIGID |
| Seal Quantity | 2 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP E52100 ROLLER |
| Material | STEEL END PLATE |
| Material | STEEL COMP E52100 OUTER RING |
| Material | STEEL COMP E52100 STUD |
| Material | PLASTIC ACETAL SEAL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Stud Diameter | 0.3105 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS562-5R15A | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-706-7894 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-706-7894: Bearing Seal Type: CONTACT; Outer Ring Width: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN; Internal Fit-Up Designation: STANDARD; Thread Length: 0.3590 INCHES NOMINAL IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.