PartsTable TECHNICAL DATA SHEET
NSN 3110-01-450-2982Government record, cited

Bearing, Ball, Rod End3110-01-450-2982

NSN 3110-01-450-2982 · NIIN 014502982 · Part number BACB10AD3L
Rexnord Industries, Llc Div Aerosspace Bearing Operation · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 77896
Government record, cited
NSN 3110-01-450-2982 — this item is cataloged by the U.S. Government under National Stock Number 3110-01-450-2982. Manufacturer of record part number: BACB10AD3L.
Also searched as  3110-01-450-2982 · 3110014502982 · NIIN 014502982 · 01-450-2982 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 77896 · BACB10AD3L
Nearby stock numbers  ·
Features
  • Bearing,ball,rod End — FSC 3110
  • Shank Diameter: 0.3750 INCHES NOMINAL IN
  • Shank Thread Length: 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM IN
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM IN
  • Internal Clearance: 0.0000 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
  • Surface Treatment Document and Classification: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
Identification
  • NSN: 3110-01-450-2982
  • NIIN: 014502982
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: BACB10AD3L
  • Manufacturer: Rexnord Industries, Llc Div Aerosspace Bearing Operation
General Description

The Bearing,ball,rod End, cataloged under National Stock Number 3110-01-450-2982, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Rexnord Industries, Llc Div Aerosspace Bearing Operation. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 6 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-450-2982
Primary Part NumberBACB10AD3L
Item NameBearing,ball,rod End
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerRexnord Industries, Llc Div Aerosspace Bearing Operation
StatusACTIVE
Shank Diameter0.3750 INCHES NOMINAL IN
Shank Thread Length0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM IN
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Outer Ring Width0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM IN
Internal Clearance0.0000 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
Surface Treatment Document and ClassificationQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
Style DesignatorDOUBLE ROW, STAGGERED, BALL
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
Material Document and ClassificationAISI ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OR AISI ASSN STD 3RD MATERIAL RESPONSE OR ASTM A322 ASSN STD 3RD MATERIAL RESPONSE OUTER RING
Material Document and ClassificationAISI ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OR AISIJGDASTM A322 ASSN STD 3RD MATERIAL RESPONSE ROD END BODY
Material Document and ClassificationAMS3652 ASSN STD 1ST MATERIAL RESPONSE SEAL
Overall Outside Diameter0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM IN
Thread DirectionLEFT-HAND
Nominal Thread Size0.375 INCHES IN
Self-Alignment Angle10.00 DEGREES NOMINAL
Shank StyleEXTERNALLY THREADED
Alignment TypeSELF-ALIGNING
Surface TreatmentCADMIUM EXPOSED SURFACES AS MOUNTED
Seal Quantity2
Thread Class3A A
Standard Tolerance DesignationABEC NO.1
Thread Quantity Per Inch24
Bore Diameter0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
Length From Bore Center to Shank End1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM IN
MaterialSTEEL COMP E52100 BALL
MaterialSTEEL COMP E52100 INNER RING
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
BACB10AD3L PRIMARY Rexnord Industries, Llc Div Aerosspace Bearing Operation (USA)
BACB10AD3L Skf Aerospace France (FRA)
BACB10AD3L Rbc Aircraft Products, Inc. (USA)
BACB10AD3L PRIMARY New Hampshire Ball Bearings Inc Div Astro Division (USA)
BACB10AD3L Minebea Mitsumi Inc. Div Rodend-Fastener Business Unit (JPN)
BACB10AD3L Roller Bearing Company of America, Inc. (USA)
Reference documents
ReferenceMeaning
BACB10AD3L 3/2 Design control — primary reference
U.S. Government activity
BACB10AD3L 5/9 Secondary reference
Minebea Mitsumi Inc.
BACB10AD3L 3/2 Design control — primary reference
U.S. Government activity
BACB10AD3L 5/9 Secondary reference
Timken Co Div the Timken Company
BACB10AD3L 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-01-450-2982?

NSN 3110-01-450-2982 is a Bearing,ball,rod End, manufactured by Rexnord Industries, Llc Div Aerosspace Bearing Operation, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-01-450-2982?

NSN 3110-01-450-2982 has 6 manufacturer part numbers on file: BACB10AD3L (Rexnord Industries, Llc Div Aerosspace Bearing Operation), BACB10AD3L (Skf Aerospace France), BACB10AD3L (Rbc Aircraft Products, Inc.), BACB10AD3L (New Hampshire Ball Bearings Inc Div Astro Division), BACB10AD3L (Minebea Mitsumi Inc. Div Rodend-Fastener Business Unit) and 1 more.

What are the specifications of BACB10AD3L?

Key specifications for BACB10AD3L: Shank Diameter: 0.3750 INCHES NOMINAL IN; Shank Thread Length: 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM IN; Bearing Seal Type: CONTACT; Lubrication Material: GREASE. 28 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-450-2982 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com