The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-422-1260, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-422-1260 |
| Item Name | Cam Follower,needle Bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN |
| Thread Length | 0.3440 INCHES NOMINAL IN |
| Style Designator | CAM FOLLOWER |
| Overall Outside Diameter | 0.4995 INCHES MINIMUM AND 0.5010 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.1900 INCHES IN |
| Stud Length | 1.0320 INCHES NOMINAL IN |
| Seal Quantity | 2 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP E52100 ROLLER |
| Material | STEEL END PLATE |
| Material | STEEL COMP E52100 OUTER RING |
| Material | STEEL COMP E52100 STUD |
| Material | PLASTIC ACETAL SEAL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Lubrication Material Document and Classification | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| Stud Diameter | 0.1885 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS562-3R3A | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-422-1260 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-422-1260: Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN; Thread Length: 0.3440 INCHES NOMINAL IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.