PartsTable TECHNICAL DATA SHEET
NSN 3110-01-390-9035Government record, cited

Cam Follower, Needle Bearing3110-01-390-9035

NSN 3110-01-390-9035 · NIIN 013909035
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-01-390-9035 · 3110013909035 · NIIN 013909035 · 01-390-9035 · FSC 3110 Bearings, Antifriction, Unmounted
Nearby stock numbers  ·
Features
  • Cam Follower,needle Bearing — FSC 3110
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
  • Internal Fit-Up Designation: STANDARD
  • Thread Length: 0.3590 INCHES NOMINAL IN
  • Style Designator: CAM FOLLOWER
  • Overall Outside Diameter: 0.7495 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM IN
Identification
  • NSN: 3110-01-390-9035
  • NIIN: 013909035
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-390-9035, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-390-9035
Item NameCam Follower,needle Bearing
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Outer Ring Width0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
Internal Fit-Up DesignationSTANDARD
Thread Length0.3590 INCHES NOMINAL IN
Style DesignatorCAM FOLLOWER
Overall Outside Diameter0.7495 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM IN
Thread DirectionRIGHT-HAND
Nominal Thread Size0.3125 INCHES IN
Stud Length0.4840 INCHES NOMINAL IN
Alignment TypeRIGID
Surface TreatmentCHROMIUM OUTER RING
Surface TreatmentCADMIUM EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED
Seal Quantity2
Thread Class3A A
Thread Quantity Per Inch24
MaterialSTEEL COMP E52100 ROLLER
MaterialSTEEL END PLATE
MaterialSTEEL COMP E52100 OUTER RING
MaterialSTEEL COMP E52100 STUD
MaterialPLASTIC ACETAL SEAL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Lubrication Material Document and ClassificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
Stud Diameter0.3105 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL Q — CCL Item — Commerce Control List
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS562-5FEE9 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-01-390-9035?

NSN 3110-01-390-9035 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What are the specifications of 3110-01-390-9035?

Key specifications for 3110-01-390-9035: Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN; Internal Fit-Up Designation: STANDARD. 24 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-390-9035 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 3110-01-390-9035?

NSN 3110-01-390-9035 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com