The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-370-1193, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-370-1193 |
| Item Name | Cam Follower,needle Bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Bearing Seal Type | LIPS TURNED OUTWARDLYLIPS TURNED OUTWARDLY |
| Outer Ring Width | 0.3700 INCHES MINIMUM AND 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM0.3750 INCHES MAXIMUM IN |
| Thread Length | 0.2500 INCHES NOMINAL0.2500 INCHES NOMINAL IN |
| Style Designator | CAM FOLLOWERCAM FOLLOWER |
| Overall Outside Diameter | 0.4990 INCHES MINIMUM AND 0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM0.5000 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HANDRIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES0.190 INCHES IN |
| Stud Length | 0.6250 INCHES NOMINAL0.6250 INCHES NOMINAL IN |
| Seal Quantity | 22 |
| Thread Class | 2A2A |
| Thread Quantity Per Inch | 3232 |
| Thread Series Designator | UNFUNF |
| Stud Diameter | 0.1900 INCHES NOMINAL0.1900 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CCF-1/2-SB | 5/2 Secondary reference U.S. Government activity |
| 84001812-002 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-370-1193 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-370-1193: Bearing Seal Type: LIPS TURNED OUTWARDLYLIPS TURNED OUTWARDLY; Outer Ring Width: 0.3700 INCHES MINIMUM AND 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM0.3750 INCHES MAXIMUM IN; Thread Length: 0.2500 INCHES NOMINAL0.2500 INCHES NOMINAL IN; Style Designator: CAM FOLLOWERCAM FOLLOWER. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.