The Bearing,ball,annular, cataloged under National Stock Number 3110-01-365-5940, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-365-5940 |
| Item Name | Bearing,ball,annular |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Retainer Fabrication Method | STAMPED |
| Lubrication Material | OIL LUBRICATING |
| Internal Clearance | 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN |
| Flange Outside Diameter | 0.2340 INCHES NOMINAL IN |
| Surface Finish | GROUND |
| Shield Quantity | 2 |
| Style Designator | NON-LOADING GROOVE, NON-SEPARABLE |
| Bore Shape | STRAIGHT |
| Load Direction | RADIAL |
| Alignment Type | RIGID |
| Flange Width | 0.0310 INCHES NOMINAL IN |
| Outer Ring Outside Diameter | 0.1875 INCHES NOMINAL IN |
| Standard Tolerance Designation | ABEC NO.5 |
| Bore Diameter | 0.0937 INCHES NOMINAL IN |
| Material | STEEL COMP 440C INNER RING |
| Material | STEEL COMP 440C OUTER RING |
| Material | STEEL CORROSION RESISTING RETAINER |
| Material | STEEL COMP 440C BALL |
| Material | STEEL CORROSION RESISTING SHIELD |
| Calibration Designator | R |
| Lubrication Material Document and Classification | KPS3C.121,FSCM 89944 MFR REF SINGLE MATERIAL RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SFR1335PPK35/91 | 3/2 Design control — primary reference U.S. Government activity |
| 30271500060 | 5/2 Secondary reference U.S. Government activity |
NSN 3110-01-365-5940 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-365-5940: Retainer Fabrication Method: STAMPED; Lubrication Material: OIL LUBRICATING; Internal Clearance: 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN; Flange Outside Diameter: 0.2340 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.