The Bearing,roller,rod End, cataloged under National Stock Number 3110-01-362-9812, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-362-9812 |
| Item Name | Bearing,roller,rod End |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Shank Diameter | 0.3750 INCHES MAXIMUM IN |
| Shank Thread Length | 0.9800 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.3750 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.375 INCHES IN |
| Self-Alignment Angle | 10.00 DEGREES NOMINAL |
| Shank Style | EXTERNALLY THREADED |
| Alignment Type | SELF-ALIGNING |
| Surface Treatment | CADMIUM EXPOSED SURFACES AS MOUNTED |
| Seal Quantity | 2 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Bore Diameter | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN |
| Length From Bore Center to Shank End | 1.8300 INCHES MINIMUM AND 1.8500 INCHES MAXIMUM IN |
| Material | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| Material | STEEL COMP E52100 ROLLER |
| Material | STEEL COMP E52100 INNER RING |
| Material | STEEL COMP 4620 OR STEEL COMP 4130 OR STEEL COMP 8620 OR STEEL COMP E52100 SUPPORTING SLEEVE |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Self-Alignment Location | INTERNAL |
| Lubrication Material Document and Classification | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| Inner Ring Width | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21221-4K | 2/2 Government specification standardization U.S. Government activity |
NSN 3110-01-362-9812 is a Bearing,roller,rod End, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-362-9812: Shank Diameter: 0.3750 INCHES MAXIMUM IN; Shank Thread Length: 0.9800 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN; Bearing Seal Type: CONTACT; Lubrication Material: GREASE. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.