The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-360-7026, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-360-7026 |
| Item Name | Cam Follower,needle Bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Lubrication Material | LUBRICANTLUBRICANT |
| Outer Ring Width | 0.7450 INCHES MINIMUM AND 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM0.7500 INCHES MAXIMUM IN |
| Thread Length | 0.6200 INCHES MINIMUM0.6200 INCHES MINIMUM IN |
| Style Designator | CAM FOLLOWERCAM FOLLOWER |
| Overall Outside Diameter | 1.1250 INCHES NOMINAL1.1250 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HANDRIGHT-HAND |
| Nominal Thread Size | 0.750 INCHES0.750 INCHES IN |
| Stud Length | 1.1250 INCHES NOMINAL1.1250 INCHES NOMINAL IN |
| Thread Class | 2A2A |
| Thread Quantity Per Inch | 1616 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Stud Diameter | 0.7500 INCHES MINIMUM AND 0.7500 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM0.7510 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CCFH-1 1/8-SB | 3/2 Design control — primary reference U.S. Government activity |
| SW32839 | 7/2 Vendor item drawing reference U.S. Government activity |
NSN 3110-01-360-7026 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-360-7026: Lubrication Material: LUBRICANTLUBRICANT; Outer Ring Width: 0.7450 INCHES MINIMUM AND 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM0.7500 INCHES MAXIMUM IN; Thread Length: 0.6200 INCHES MINIMUM0.6200 INCHES MINIMUM IN; Style Designator: CAM FOLLOWERCAM FOLLOWER. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.