The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-355-1001, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-355-1001 |
| Item Name | Cam Follower,needle Bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Bearing Seal Type | CONTACTCONTACT |
| Lubrication Material | GREASEGREASE |
| Outer Ring Width | 0.6510 INCHES MINIMUM AND 0.6510 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM0.6560 INCHES MAXIMUM IN |
| Thread Length | 0.4220 INCHES NOMINAL0.4220 INCHES NOMINAL IN |
| Style Designator | CAM FOLLOWERCAM FOLLOWER |
| Overall Outside Diameter | 1.1245 INCHES MINIMUM AND 1.1245 INCHES MINIMUM AND 1.1260 INCHES MAXIMUM1.1260 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HANDRIGHT-HAND |
| Nominal Thread Size | 0.500 INCHES0.500 INCHES IN |
| Specification/standard Data | 80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Stud Length | 1.7810 INCHES MINIMUM AND 1.7810 INCHES MINIMUM AND 1.8280 INCHES MAXIMUM1.8280 INCHES MAXIMUM IN |
| Alignment Type | RIGIDRIGID |
| Seal Quantity | 22 |
| Thread Class | 3A3A |
| Test Data Document | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 2020 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Lubrication Material Document and Classification | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSEMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| Stud Diameter | 0.4985 INCHES MINIMUM AND 0.4985 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM0.5000 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | N |
| Reference | Meaning |
|---|---|
| NAS562-8FEE22A | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-355-1001 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-355-1001: Bearing Seal Type: CONTACTCONTACT; Lubrication Material: GREASEGREASE; Outer Ring Width: 0.6510 INCHES MINIMUM AND 0.6510 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM0.6560 INCHES MAXIMUM IN; Thread Length: 0.4220 INCHES NOMINAL0.4220 INCHES NOMINAL IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.