The Bearing,ball,duplex, cataloged under National Stock Number 3110-01-318-3556, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-318-3556 |
| Item Name | Bearing,ball,duplex |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Retainer Fabrication Method | PRESSED |
| Internal Clearance | 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN |
| Surface Treatment Document and Classification | ASTMA380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Surface Finish | GROUND |
| Shield Quantity | 2 |
| Style Designator | COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING |
| Material Document and Classification | UNABLE TO DECODE |
| Overall Outside Diameter | 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN |
| Load Direction | RADIAL |
| Surface Treatment | PASSIVATE OVERALL |
| Standard Tolerance Designation | ABEC NO.7 |
| Bore Diameter | 0.2500 INCHES NOMINAL IN |
| Material | STEEL COMP 440C INNER RING |
| Material | STEEL COMP 440C OUTER RING |
| Material | GREASE LUBRICATION |
| Material | STEEL CORROSION RESISTING RETAINER |
| Material | STEEL COMP 440C SHIELD |
| Material | STEEL COMP 440C BALL |
| Lubrication Material Document and Classification | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SSR1-814X99ZDB1HA7P28LG68E | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-318-3556 is a Bearing,ball,duplex, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-318-3556: Retainer Fabrication Method: PRESSED; Internal Clearance: 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN; Surface Treatment Document and Classification: ASTMA380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Surface Finish: GROUND. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.