PartsTable TECHNICAL DATA SHEET
NSN 3110-01-310-5278Government record, cited

Bearing, Roller, Rod End3110-01-310-5278

NSN 3110-01-310-5278 · NIIN 013105278 · Part number MS21223-4
Sae International Dba Sae International · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 0U583
Government record, cited
NSN 3110-01-310-5278 — this item is cataloged by the U.S. Government under National Stock Number 3110-01-310-5278. Manufacturer of record part number: MS21223-4.
Also searched as  3110-01-310-5278 · 3110013105278 · NIIN 013105278 · 01-310-5278 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 0U583 · MS21223-4 · AS21223 · AS8952 · AS8952
Nearby stock numbers  ·
Features
  • Bearing,roller,rod End — FSC 3110
  • Shank Diameter: 0.3750 INCHES NOMINAL IN
  • Shank Thread Length: 1.0600 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM IN
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.3450 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM IN
  • Internal Clearance: 0.0001 INCHES MINIMUM RADIAL AND 0.0015 INCHES MAXIMUM RADIAL IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
Identification
  • NSN: 3110-01-310-5278
  • NIIN: 013105278
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: MS21223-4
  • Manufacturer: Sae International Dba Sae International
General Description

The Bearing,roller,rod End, cataloged under National Stock Number 3110-01-310-5278, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-310-5278
Primary Part NumberMS21223-4
Item NameBearing,roller,rod End
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerSae International Dba Sae International
StatusACTIVE
Shank Diameter0.3750 INCHES NOMINAL IN
Shank Thread Length1.0600 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM IN
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Outer Ring Width0.3450 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM IN
Internal Clearance0.0001 INCHES MINIMUM RADIAL AND 0.0015 INCHES MAXIMUM RADIAL IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
Style DesignatorSINGLE ROW, SPHERICAL ROLLERS
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE ROLLER
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE ROD END BODY
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE INNER RING
Material Document and ClassificationAMS 3452 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3660 ASSN STD SINGLE MATERIAL RESPONSE SEAL
Overall Outside Diameter0.9700 INCHES MINIMUM AND 1.0200 INCHES MAXIMUM IN
Thread DirectionRIGHT-HAND
Nominal Thread Size0.3750 INCHES IN
Self-Alignment Angle45.00 DEGREES NOMINAL
Shank StyleEXTERNALLY THREADED
Alignment TypeSELF-ALIGNING
Surface TreatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Seal Quantity2
Thread Class3B
Thread Quantity Per Inch24
Bore Diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
Length From Bore Center to Shank End1.8650 INCHES MINIMUM AND 1.8950 INCHES MAXIMUM IN
MaterialPLASTIC POLYTETRAFLUOROETHYLENE SEAL
MaterialSTEEL COMP E52100 ROLLER
MaterialSTEEL COMP E52100 INNER RING
MaterialSTEEL COMP E9310 LOADING GROOVE SIDE
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3110-01-368-2589MS21221-4 POSSIBLE MATCH
BEARING,ROLLER,ROD END
Possible match (shared part number)Sae International Dba Sae International
3110-01-556-2681MS21223-4K POSSIBLE MATCH
BEARING,BALL,ROD END
Possible match (shared part number)Sae International Dba Sae International
Cross-Reference Index
Part NumberManufacturer
MS21223-4 PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
AS21223 5/9 Secondary reference
U.S. Government activity
AS8952 5/9 Secondary reference
U.S. Government activity
MS21223-4 3/9 Design control — primary reference
U.S. Government activity
AS8952 5/1 Secondary reference
Sae International Dba Sae International
MS21223-4 5/9 Secondary reference
U.S. Government activity
AS21223 5/1 Secondary reference
Sae International Dba Sae International
Related Parts
3110-01-368-2589POSSIBLE MATCH
BEARING,ROLLER,ROD END
MS21221-4
3110-01-556-2681POSSIBLE MATCH
BEARING,BALL,ROD END
MS21223-4K

Frequently Asked Questions

What is NSN 3110-01-310-5278?

NSN 3110-01-310-5278 is a Bearing,roller,rod End, manufactured by Sae International Dba Sae International, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-01-310-5278?

NSN 3110-01-310-5278 has 1 manufacturer part number on file: MS21223-4 (Sae International Dba Sae International).

What NSN replaces 3110-01-310-5278?

2 possible matches (shared part number, not a government interchangeability claim): 3110-01-368-2589, 3110-01-556-2681. Verify interchangeability with system specifications before substitution.

What are the specifications of MS21223-4?

Key specifications for MS21223-4: Shank Diameter: 0.3750 INCHES NOMINAL IN; Shank Thread Length: 1.0600 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM IN; Bearing Seal Type: CONTACT; Lubrication Material: GREASE. 29 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-310-5278 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com