PartsTable TECHNICAL DATA SHEET
NSN 3110-01-305-0206Government record, cited

Bearing, Roller, Rod End3110-01-305-0206

NSN 3110-01-305-0206 · NIIN 013050206 · Part number GB525D5
Rexnord Industries, Llc Div Aerosspace Bearing Operation · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 77896
Government record, cited
NSN 3110-01-305-0206 — this item is cataloged by the U.S. Government under National Stock Number 3110-01-305-0206. Manufacturer of record part number: GB525D5.
Also searched as  3110-01-305-0206 · 3110013050206 · NIIN 013050206 · 01-305-0206 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 77896 · GB525D5 · SF5-6A1-502
Nearby stock numbers  ·
Features
  • Bearing,roller,rod End — FSC 3110
  • Shank Diameter: 0.3750 INCHES NOMINAL IN
  • Shank Thread Length: 0.8100 INCHES NOMINAL IN
  • Bearing Seal Type: CONTACT
  • Width Across Flats: 0.5000 INCHES NOMINAL IN
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.3400 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
Identification
  • NSN: 3110-01-305-0206
  • NIIN: 013050206
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: GB525D5
  • Manufacturer: Rexnord Industries, Llc Div Aerosspace Bearing Operation
General Description

The Bearing,roller,rod End, cataloged under National Stock Number 3110-01-305-0206, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Rexnord Industries, Llc Div Aerosspace Bearing Operation. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-305-0206
Primary Part NumberGB525D5
Item NameBearing,roller,rod End
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerRexnord Industries, Llc Div Aerosspace Bearing Operation
StatusACTIVE
Shank Diameter0.3750 INCHES NOMINAL IN
Shank Thread Length0.8100 INCHES NOMINAL IN
Bearing Seal TypeCONTACT
Width Across Flats0.5000 INCHES NOMINAL IN
Lubrication MaterialGREASE
Outer Ring Width0.3400 INCHES NOMINAL IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
Shield Quantity2
Style DesignatorSINGLE ROW, SPHERICAL ROLLERS
Material Document and ClassificationMIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER
Material Document and ClassificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RACE
Self-Alignment Angle10.0000 DEGREES NOMINAL
Shank StyleINTERNALLY THREADED W/HEXAGON END AND HOLE
Alignment TypeRIGID
Distance From Hole Center to End0.4100 INCHES MINIMUM AND 0.4700 INCHES MAXIMUM IN
Surface TreatmentCADMIUM EXPOSED SURFACES AS MOUNTED
Seal Quantity2
Bore Diameter0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
Length From Bore Center to Shank End1.7600 INCHES MINIMUM AND 2.0600 INCHES MAXIMUM IN
MaterialSTEEL COMP 430 SHIELD
MaterialSTEEL COMP 4620 ROD END BODY
MaterialSTEEL COMP E52100 ROLLER
MaterialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL
MaterialSTEEL COMP E52100 INNER RACE
Lubrication Material Document and ClassificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
Hole Diameter0.0700 INCHES NOMINAL IN
Inner Ring Width0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
GB525D5 PRIMARY Rexnord Industries, Llc Div Aerosspace Bearing Operation (USA)
Reference documents
ReferenceMeaning
SF5-6A1-502 5/1 Secondary reference
Rexnord Industries, Llc Div Aerosspace Bearing Operation
GB525D5 7/2 Vendor item drawing reference
Northrop Grumman Systems Corporation
No interchangeability data on file.
Other items in FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1937
BEARING,ROLLER,NEEDLE
3110-00-001-1938
BEARING,BALL,AIRFRAME
3110-00-001-4661
CONE AND ROLLERS,TAPERED ROLLER
3110-00-001-4662
CUP,TAPERED ROLLER BEARING
3110-00-001-4689
BEARING,BALL,ANNULAR
3110-00-001-4722
BEARING,BALL,ANNULAR

Frequently Asked Questions

What is NSN 3110-01-305-0206?

NSN 3110-01-305-0206 is a Bearing,roller,rod End, manufactured by Rexnord Industries, Llc Div Aerosspace Bearing Operation, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-01-305-0206?

NSN 3110-01-305-0206 has 1 manufacturer part number on file: GB525D5 (Rexnord Industries, Llc Div Aerosspace Bearing Operation).

What are the specifications of GB525D5?

Key specifications for GB525D5: Shank Diameter: 0.3750 INCHES NOMINAL IN; Shank Thread Length: 0.8100 INCHES NOMINAL IN; Bearing Seal Type: CONTACT; Width Across Flats: 0.5000 INCHES NOMINAL IN. 28 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-305-0206 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com