The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-264-1158, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-264-1158 |
| Item Name | Cam Follower,needle Bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Bearing Seal Type | LIPS TURNED OUTWARDLY |
| Outer Ring Width | 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS 2485 ASSN STD SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| Thread Length | 0.7500 INCHES NOMINAL IN |
| Style Designator | CAM FOLLOWER |
| Overall Outside Diameter | 1.6240 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN |
| Features Provided | FLUSH LUBRICATION FITTING |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.875 INCHES IN |
| Stud Length | 1.5000 INCHES NOMINAL IN |
| Surface Treatment | OXIDE EXPOSED SURFACES AS MOUNTED |
| Seal Quantity | 2 |
| Thread Class | 2B |
| Standard Tolerance Designation | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| Thread Quantity Per Inch | 14 |
| Material | STEEL OUTER RING |
| Material | RUBBER SYNTHETIC SEAL |
| Material | STEEL STUD |
| Material | STEEL END PLATE |
| Material | STEEL ROLLER |
| Thread Series Designator | UNF |
| Stud Diameter | 0.8750 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| JCM-15276-001 | 7/2 Vendor item drawing reference Strike Weapons and Unmanned Aviation |
| CCFH-1 5/8-SB | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-264-1158 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-264-1158: Bearing Seal Type: LIPS TURNED OUTWARDLY; Outer Ring Width: 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS 2485 ASSN STD SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED; Thread Length: 0.7500 INCHES NOMINAL IN. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.