PartsTable TECHNICAL DATA SHEET
NSN 3110-01-245-3851Government record, cited

Bearing, Ball, Annular3110-01-245-3851

NSN 3110-01-245-3851 · NIIN 012453851 · Part number D2-72621
Skf Usa Inc. · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 38443
Government record, cited
NSN 3110-01-245-3851 — this item is cataloged by the U.S. Government under National Stock Number 3110-01-245-3851. Manufacturer of record part number: D2-72621.
Also searched as  3110-01-245-3851 · 3110012453851 · NIIN 012453851 · 01-245-3851 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 38443 · D2-72621 · 9360850
Nearby stock numbers  ·
Features
  • Bearing,ball,annular — FSC 3110
  • Retainer Fabrication Method: PRESSED
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Internal Clearance: 0.0004 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN
  • Surface Finish: GROUND
  • Style Designator: NON-LOADING GROOVE, NON-SEPARABLE
  • Material Document and Classification: 66 FED STD SINGLE MATERIAL RESPONSE BALL
Identification
  • NSN: 3110-01-245-3851
  • NIIN: 012453851
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: D2-72621
  • Manufacturer: Skf Usa Inc.
General Description

The Bearing,ball,annular, cataloged under National Stock Number 3110-01-245-3851, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Skf Usa Inc.. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-245-3851
Primary Part NumberD2-72621
Item NameBearing,ball,annular
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerSkf Usa Inc.
StatusACTIVE
Retainer Fabrication MethodPRESSED
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Internal Clearance0.0004 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN
Surface FinishGROUND
Style DesignatorNON-LOADING GROOVE, NON-SEPARABLE
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE BALL
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE RETAINER
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE INNER RING
Material Document and Classification66 FED STD ALL MATERIAL RESPONSES SNAP RING
Overall Outside Diameter40.0 MILLIMETERS NOMINAL MM
Features ProvidedSNAP RING-GROOVE MOUNTING
Bore ShapeSTRAIGHT
Load DirectionRADIAL
Alignment TypeRIGID
Seal Quantity2
Standard Tolerance DesignationABEC NO.1
Bore Diameter17.0 MILLIMETERS NOMINAL MM
MaterialSTEEL COMP E52100 BALL
MaterialRUBBER SYNTHETIC SEAL
MaterialSTEEL COMP 1010 RETAINER
MaterialSTEEL COMP E52100 OUTER RING
MaterialSTEEL COMP E52100 INNER RING
MaterialSTEEL COMP 1085 OR STEEL COMP 1080 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1084 OR STEEL COMP 1074 OR STEEL COMP 1572 OR STEEL COMP 1060 OR STEEL COMP 1064 OR STEEL COMP 1078 OR STEEL COMP 1069 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1561 OR STEEL COMP 1086 OR STEEL COMP 1090 SNAP RING
Lubrication Material Document and ClassificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
D2-72621 PRIMARY Skf Usa Inc. (USA)
Reference documents
ReferenceMeaning
9360850 7/2 Vendor item drawing reference
Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate

Frequently Asked Questions

What is NSN 3110-01-245-3851?

NSN 3110-01-245-3851 is a Bearing,ball,annular, manufactured by Skf Usa Inc., classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-01-245-3851?

NSN 3110-01-245-3851 has 1 manufacturer part number on file: D2-72621 (Skf Usa Inc.).

What are the specifications of D2-72621?

Key specifications for D2-72621: Retainer Fabrication Method: PRESSED; Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Internal Clearance: 0.0004 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN. 26 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-245-3851 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com