The Cam Follower,needle Bearing, cataloged under National Stock Number 3110-01-237-1067, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-237-1067 |
| Item Name | Cam Follower,needle Bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.4850 INCHES MINIMUM AND 0.4900 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING OUTSIDE DIAMETER |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED |
| Thread Length | 0.3590 INCHES NOMINAL IN |
| Style Designator | CAM FOLLOWER |
| Overall Outside Diameter | 0.9995 INCHES MINIMUM AND 1.0010 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.3750 INCHES IN |
| Stud Length | 0.7430 INCHES MINIMUM AND 0.7900 INCHES MAXIMUM IN |
| Surface Treatment | CHROMIUM OUTER RING OUTSIDE DIAMETER |
| Surface Treatment | CADMIUM EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED |
| Seal Quantity | 2 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OUTER RING |
| Material | STEEL STUD |
| Material | STEEL END PLATE |
| Material | STEEL ROLLER |
| Material | PLASTIC POLYAMIDE NYLON SEAL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Lubrication Material Document and Classification | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| Stud Diameter | 0.3735 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CF-2708 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-237-1067 is a Cam Follower,needle Bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-237-1067: Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.4850 INCHES MINIMUM AND 0.4900 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING OUTSIDE DIAMETER. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.