The Bearing,ball,annular, cataloged under National Stock Number 3110-01-228-9561, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-228-9561 |
| Item Name | Bearing,ball,annular |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Retainer Fabrication Method | PRESSED |
| Bearing Seal Type | CONTACT |
| Lubrication Material | GREASE |
| Internal Fit-Up Designation | STANDARD |
| Surface Finish | GROUND |
| Style Designator | NON-LOADING GROOVE, NON-SEPARABLE |
| Overall Outside Diameter | 0.6250 INCHES NOMINAL IN |
| Bore Shape | STRAIGHT |
| Load Direction | RADIAL |
| Alignment Type | RIGID |
| Seal Quantity | 2 |
| Standard Tolerance Designation | ABEC NO.3 |
| Bore Diameter | 0.2500 INCHES NOMINAL IN |
| Material | STEEL CORROSION RESISTING OUTER RING |
| Material | RUBBER SYNTHETIC SEAL |
| Material | STEEL CORROSION RESISTING INNER RING |
| Material | STEEL CORROSION RESISTING BALL |
| Material | STEEL CORROSION RESISTING RETAINER |
| Lubrication Material Document and Classification | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| G306621 | 5/9 Secondary reference American Telephone and Telegraph Co |
| G306621 | 5/9 Secondary reference General Motors Corp Delco Moraine Ndh Div |
| SSZ99R4XR3E8 | 3/9 Design control — primary reference General Motors Corp Delco Moraine Ndh Div |
NSN 3110-01-228-9561 is a Bearing,ball,annular, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-228-9561: Retainer Fabrication Method: PRESSED; Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Internal Fit-Up Designation: STANDARD. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.