PartsTable TECHNICAL DATA SHEET
NSN 3110-01-220-6581Government record, cited

Bearing, Ball, Duplex3110-01-220-6581

NSN 3110-01-220-6581 · NIIN 012206581
FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings
Government record, cited
Also searched as  3110-01-220-6581 · 3110012206581 · NIIN 012206581 · 01-220-6581 · FSC 3110 Bearings, Antifriction, Unmounted · 930023 · SR541PPB11C31WK58
Nearby stock numbers  ·
Features
  • Bearing,ball,duplex — FSC 3110
  • Retainer Fabrication Method: MACHINED
  • Bearing Preload Rating: 10.0 POUNDS MINIMUM AND 20.0 POUNDS MAXIMUM LBS
  • Internal Clearance: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
  • Surface Finish: GROUND
  • Shield Quantity: 2
  • Style Designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
  • Overall Outside Diameter: 1.5000 INCHES NOMINAL IN
Identification
  • NSN: 3110-01-220-6581
  • NIIN: 012206581
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
General Description

The Bearing,ball,duplex, cataloged under National Stock Number 3110-01-220-6581, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-220-6581
Item NameBearing,ball,duplex
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
StatusACTIVE
Retainer Fabrication MethodMACHINED
Bearing Preload Rating10.0 POUNDS MINIMUM AND 20.0 POUNDS MAXIMUM LBS
Internal Clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
Surface FinishGROUND
Shield Quantity2
Style DesignatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
Overall Outside Diameter1.5000 INCHES NOMINAL IN
Contact Angle16.0 DEGREES MINIMUM AND 23.0 DEGREES MAXIMUM
Load DirectionANGULAR
Standard Tolerance DesignationABEC NO. 7T
Bore Diameter1.0625 INCHES NOMINAL IN
MaterialSTEEL COMP 440C INNER RING
MaterialOIL LUBRICATION
MaterialSTEEL COMP 440C OUTER RING
MaterialPLASTIC PHENOLIC RETAINER
MaterialSTEEL COMP 440C SHIELD
MaterialSTEEL COMP 440C BALL
Lubrication Material Document and ClassificationADMS150019,FSCM 83086 MFR REF SINGLE MATERIAL RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
4240-01-502-7440930023 POSSIBLE MATCH
POUCH,SPECIAL
Possible match (shared part number)Ocenco Inc
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
930023 7/2 Vendor item drawing reference
Lockheed Martin Corp Electronics and Missiles Div
SR541PPB11C31WK58 3/2 Design control — primary reference
U.S. Government activity
Related Parts
4240-01-502-7440POSSIBLE MATCH
POUCH,SPECIAL
930023

Frequently Asked Questions

What is NSN 3110-01-220-6581?

NSN 3110-01-220-6581 is a Bearing,ball,duplex, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What NSN replaces 3110-01-220-6581?

1 possible match (shared part number, not a government interchangeability claim): 4240-01-502-7440. Verify interchangeability with system specifications before substitution.

What are the specifications of 3110-01-220-6581?

Key specifications for 3110-01-220-6581: Retainer Fabrication Method: MACHINED; Bearing Preload Rating: 10.0 POUNDS MINIMUM AND 20.0 POUNDS MAXIMUM LBS; Internal Clearance: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN; Surface Finish: GROUND. 18 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-220-6581 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com