The Plate,retaining,bearing, cataloged under National Stock Number 3110-01-216-4087, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-216-4087 |
| Item Name | Plate,retaining,bearing |
| FSC / FSG | 3110 / 31 — Bearings, Antifriction, Unmounted |
| Status | ACTIVE |
| Surface Treatment Document and Classification | 595 FED STD SINGLE TREATMENT RESPONSE OUTER FACE AS MOUNTED |
| Minor Thickness | 0.250 INCHES NOMINAL IN |
| Raised Surface Height | 0.150 INCHES NOMINAL IN |
| Distance Between Holes Along Length | 0.960 INCHES NOMINAL IN |
| Bolt Circle Hole Quantity | 4 |
| Mounting Hole Type | ROUND, UNTHREADED |
| Counterbore Diameter | 1.750 INCHES NOMINAL IN |
| Counterbore Depth | 0.400 INCHES NOMINAL IN |
| Mounting Hole Arrangement Style | FOUR HOLES |
| Overall Thickness | 0.800 INCHES NOMINAL IN |
| Distance Between Holes Along Width | 0.960 INCHES NOMINAL IN |
| Style Designator | ROUND |
| Material Document and Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Mounting Hole Diameter | 0.327 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN |
| Cross-Sectional Shape Style | RAISED SURFACE W/O APERTURE |
| Outside Diameter | 1.9994 INCHES MINIMUM AND 2.0003 INCHES MAXIMUM IN |
| Distance From Horizontal Centerline to Center of Lower Hole | 0.480 INCHES NOMINAL IN |
| Inside Raised Surface Diameter | 1.4989 INCHES NOMINAL IN |
| Distance From Vertical Centerline to Center of Right Hole | 0.480 INCHES NOMINAL IN |
| Surface Treatment | PAINT OUTER FACE AS MOUNTED |
| Test Data Document | 36659-LC+72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Outside Raised Surface Diameter | 1.7484 INCHES MINIMUM AND 1.7493 INCHES MAXIMUM IN |
| Material | STEEL COMP XM-13 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 1292651-101 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3110-01-216-4087 is a Plate,retaining,bearing, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.
Key specifications for 3110-01-216-4087: Surface Treatment Document and Classification: 595 FED STD SINGLE TREATMENT RESPONSE OUTER FACE AS MOUNTED; Minor Thickness: 0.250 INCHES NOMINAL IN; Raised Surface Height: 0.150 INCHES NOMINAL IN; Distance Between Holes Along Length: 0.960 INCHES NOMINAL IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 3110-01-216-4087 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.