PartsTable TECHNICAL DATA SHEET
NSN 3110-01-208-5389Government record, cited

Bearing, Roller, Needle3110-01-208-5389

NSN 3110-01-208-5389 · NIIN 012085389 · Part number MS21438-104
Sae International Dba Sae International · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 0U583
Government record, cited
NSN 3110-01-208-5389 — this item is cataloged by the U.S. Government under National Stock Number 3110-01-208-5389. Manufacturer of record part number: MS21438-104.
Also searched as  3110-01-208-5389 · 3110012085389 · NIIN 012085389 · 01-208-5389 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 0U583 · MS21438-104 · AS21438 · AS21438
Nearby stock numbers  ·
Features
  • Bearing,roller,needle — FSC 3110
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.3300 INCHES MINIMUM AND 0.3450 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-13924 MIL SPEC 2ND TREATMENT RESPONSE INNER RING
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-13924 MIL SPEC 2ND TREATMENT RESPONSE RETAINING PLATE
  • Surface Finish: GROUND
Identification
  • NSN: 3110-01-208-5389
  • NIIN: 012085389
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: MS21438-104
  • Manufacturer: Sae International Dba Sae International
General Description

The Bearing,roller,needle, cataloged under National Stock Number 3110-01-208-5389, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-208-5389
Primary Part NumberMS21438-104
Item NameBearing,roller,needle
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerSae International Dba Sae International
StatusACTIVE
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Outer Ring Width0.3300 INCHES MINIMUM AND 0.3450 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-13924 MIL SPEC 2ND TREATMENT RESPONSE INNER RING
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-13924 MIL SPEC 2ND TREATMENT RESPONSE RETAINING PLATE
Surface FinishGROUND
Crown Radius10.0000 INCHES NOMINAL IN
Style DesignatorTRACK ROLLER
Material Document and Classification66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES INNER RING
Material Document and Classification66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES OUTER RING
Material Document and Classification66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES RETAINING PLATE
Material Document and Classification66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES ROLLER
Material Document and ClassificationL-P-392 FED SPEC 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 2ND MATERIAL RESPONSE SEAL
Overall Outside Diameter0.8740 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM IN
Features ProvidedLUBRICATION HOLE AND LUBRICATION GROOVE
Specification/standard Data96906-MS21438 GOVERNMENT STANDARD
Alignment TypeRIGID
Surface TreatmentCHROMIUM OUTER RING
Surface TreatmentCADMIUM OR OXIDE INNER RING
Surface TreatmentCADMIUM OR OXIDE RETAINING PLATE
Seal Quantity2
Bore Diameter0.2493 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
MaterialSTEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 ROLLER
MaterialPLASTIC ACETAL OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE SEAL
MaterialSTEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 INNER RING
MaterialSTEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 OUTER RING
MaterialSTEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 RETAINING PLATE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3110-01-411-3208AS21438 POSSIBLE MATCH
BEARING,ROLLER,NEEDLE
Possible match (shared part number)Sae International Dba Sae International
Cross-Reference Index
Part NumberManufacturer
MS21438-104 PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
AS21438 3/1 Design control — primary reference
Sae International Dba Sae International
MS21438-104 5/9 Secondary reference
U.S. Government activity
AS21438 5/9 Secondary reference
U.S. Government activity
MS21438-104 5/9 Secondary reference
U.S. Government activity
Related Parts
3110-01-411-3208POSSIBLE MATCH
BEARING,ROLLER,NEEDLE
AS21438

Frequently Asked Questions

What is NSN 3110-01-208-5389?

NSN 3110-01-208-5389 is a Bearing,roller,needle, manufactured by Sae International Dba Sae International, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-01-208-5389?

NSN 3110-01-208-5389 has 1 manufacturer part number on file: MS21438-104 (Sae International Dba Sae International).

What NSN replaces 3110-01-208-5389?

1 possible match (shared part number, not a government interchangeability claim): 3110-01-411-3208. Verify interchangeability with system specifications before substitution.

What are the specifications of MS21438-104?

Key specifications for MS21438-104: Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.3300 INCHES MINIMUM AND 0.3450 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING. 28 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-208-5389 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com