PartsTable TECHNICAL DATA SHEET
NSN 3110-01-195-5148Government record, cited

Bearing, Roller, Needle3110-01-195-5148

NSN 3110-01-195-5148 · NIIN 011955148 · Part number MS21438-112
Sae International Dba Sae International · FSC 3110 — Bearings, Antifriction, Unmounted · FSG 31 — Bearings · CAGE 0U583
Government record, cited
NSN 3110-01-195-5148 — this item is cataloged by the U.S. Government under National Stock Number 3110-01-195-5148. Manufacturer of record part number: MS21438-112.
Also searched as  3110-01-195-5148 · 3110011955148 · NIIN 011955148 · 01-195-5148 · FSC 3110 Bearings, Antifriction, Unmounted · CAGE 0U583 · MS21438-112 · ATF-12 · ATF-12 · AC47221
Nearby stock numbers  ·
Features
  • Bearing,roller,needle — FSC 3110
  • Bearing Seal Type: CONTACT
  • Lubrication Material: GREASE
  • Outer Ring Width: 0.9350 INCHES MINIMUM AND 0.9750 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING
  • Surface Finish: GROUND
  • Style Designator: CAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
Identification
  • NSN: 3110-01-195-5148
  • NIIN: 011955148
  • FSC: 3110 — Bearings, Antifriction, Unmounted
  • FSG: 31 — Bearings
  • Primary part number: MS21438-112
  • Manufacturer: Sae International Dba Sae International
General Description

The Bearing,roller,needle, cataloged under National Stock Number 3110-01-195-5148, is classified within Federal Supply Class 3110 (Bearings, Antifriction, Unmounted) of the Bearings group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3110-01-195-5148
Primary Part NumberMS21438-112
Item NameBearing,roller,needle
FSC / FSG3110 / 31 — Bearings, Antifriction, Unmounted
ManufacturerSae International Dba Sae International
StatusACTIVE
Bearing Seal TypeCONTACT
Lubrication MaterialGREASE
Outer Ring Width0.9350 INCHES MINIMUM AND 0.9750 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
Surface Treatment Document and ClassificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING
Surface FinishGROUND
Style DesignatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
Material Document and ClassificationAISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
Material Document and ClassificationAISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING
Material Document and ClassificationAISI ASSN STD ALL MATERIAL RESPONSES ROLLER
Overall Outside Diameter1.7490 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
Features ProvidedLUBRICATION HOLE AND LUBRICATION GROOVE
Specification/standard Data96906-MS21438 GOVERNMENT STANDARD
Alignment TypeRIGID
Surface TreatmentCHROMIUM OUTER RING
Surface TreatmentCADMIUM INNER RING
Surface TreatmentCADMIUM RETAINING PLATE
Seal Quantity2
Bore Diameter0.7493 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
MaterialSTEEL COMP E52100 OUTER RING
MaterialSTEEL COMP E52100 INNER RING
MaterialSTEEL RETAINING PLATE
MaterialPLASTIC ACETAL SEAL
MaterialPLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYAMIDE NYLON OR PLASTIC ACETAL WASHER
MaterialSTEEL COMP E50100 OR STEEL COMP E52100 ROLLER
Lubrication Material Document and ClassificationMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
Inner Ring Width0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
MS21438-112 PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
ATF-12 5/1 Secondary reference
Rbc Aircraft Products, Inc.
ATF-12 5/1 Secondary reference
Timken Co Div the Timken Company
AC47221 5/9 Secondary reference
Timken Aerospace, Inc Dba Torrington Product
MS21438-112 3/9 Design control — primary reference
U.S. Government activity
MS21438-112 5/9 Secondary reference
U.S. Government activity
ATF-12 5/9 Secondary reference
Timken Aerospace, Inc Dba Torrington Product

Frequently Asked Questions

What is NSN 3110-01-195-5148?

NSN 3110-01-195-5148 is a Bearing,roller,needle, manufactured by Sae International Dba Sae International, classified under FSC 3110, Bearings, Antifriction, Unmounted. Status: active.

What part numbers are listed for NSN 3110-01-195-5148?

NSN 3110-01-195-5148 has 1 manufacturer part number on file: MS21438-112 (Sae International Dba Sae International).

What are the specifications of MS21438-112?

Key specifications for MS21438-112: Bearing Seal Type: CONTACT; Lubrication Material: GREASE; Outer Ring Width: 0.9350 INCHES MINIMUM AND 0.9750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING. 27 specifications are documented in the U.S. Government catalog.

Is NSN 3110-01-195-5148 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com